All Products

SKU: SF-CAB-15455

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 18mm apart.

SKU: SF-DEV-26586 · MPN: DEV-26586

The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-based wired Ethernet.The board pinout is directly connected to the RP2040 GPIO an...

SKU: AF-5800 · MPN: ADA5800

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolutions, including square, round and bar-style displays that need continuous pixel...

SKU: EC-AS402812NP

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...

SKU: LB-LS2218

This compact solar panel is rated at 3V and 100mA, making it a useful power source for small electronics and maker projects.It comes fitted with a JST connector, so it can be wired into compatible projects without needing to solder directly to the panel leads.Specifications:Voltage: 3VCurrent: 10...

SKU: SF-CAB-15464

This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 16.5mm apart.

SKU: LB-LS6060

A compact 120 × 120 mm polycrystalline solar panel that outputs 5V at up to 400mA (2W) in direct sunlight. Pre-wired for easy connection to microcontrollers, battery charging circuits, and small solar-powered projects. Key Features 5V Regulated Output – 400mA (2W) in direct sunlight, suitable ...

SKU: SF-CAB-10177

You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other. Documents: Datasheet

SKU: ET-1734948

This 5 metre Cat5e lead is a handy network cable for longer Raspberry Pi setups, desktop projects, routers, switches and other RJ45 networking gear.It has RJ45 plugs on both ends and a black jacket, making it suitable for straightforward wired network connections where a 5m run is needed.Features...

SKU: AF-4631

A pack of four magnetic mounting feet designed for RGB LED matrix panels. At 16.6 mm long, each magnet-screw slots into the standard 3 mm mounting bosses found on most RGB matrix panels, providing a quick and secure way to display your project on any magnetic surface. Compatible Panels 16×32 RG...

SKU: SF-DEV-23386 · MPN: DEV-23386

Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that ca...