All Products

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: SF-BOB-13021

This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbed Starter Kit and breaks out each pin from the ethernet jack. This rev of the br...

SKU: SF-BOB-13830

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get t...

SKU: AF-5228

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED – 128 × 64 pixel resolution SH1106G Driver – SPI interface 16-Pin FPC Connecto...

SKU: AF-4077

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF52832 chip that comes integrated with BLE radio as well as most of the supporting circuitry and even a chip antenna. The whole thing comes ...

SKU: SF-BOB-14021

This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin Connectors to work with common telephone cables. Each board features standard B/R/Y/G (Black/Red/Yellow/Green) labels on the top of the ...

SKU: DF-DFR1026

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...

SKU: AF-4911

This dual-edge side-light NeoPixel strip features LEDs on both the top and bottom of the flexible PCB, producing an even glow from both sides. With 60 LED pairs per metre (120 LEDs total), both LEDs in each segment display the same colour simultaneously, making it ideal for edge-lighting where th...