All Products

SKU: SF-PRT-16763

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...

SKU: SF-PRT-16764

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. This is assuming that the board is only pop...

SKU: YH-6000200548

DOFBOT-SE is a 6DOF robotic arm developed by Yahboom based on a virtual machine system. It does not require a embedded development board (Jetson NANO/Raspberry Pi), generates control decisions through a PC-side virtual machine, and is driven by an STM32 controller to implement various functions. ...

SKU: SF-ROB-16328

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...

SKU: SF-PRT-17599

This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings as well.This hardware set is identical to what is included in our JetBot kit options.

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: AF-1994

This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....

SKU: SF-DEV-13664

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an o...

SKU: SF-COM-09378

Atmel’s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. Documents: Product Card Arduino Board Definitions

SKU: AF-6340 · MPN: ADA6340

The Adafruit INA237 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC, it delivers accurate measurements from milliamps to 10A — all over a simple I2C...