All Products

SKU: DF-DFR0913

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrollers. Each channel features photoelectric isolation for reliable signal separation...

SKU: AF-5378

The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel to the PCB surface rather than perpendicular — ideal for edge-lit enclosures an...

SKU: AF-6109 · MPN: ADA6109

The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making it straightforward to achieve precise, controlled motion without complex timer o...

SKU: DF-DFR1034 · MPN: DFR1034

##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...

SKU: DF-DFR1037 · MPN: DFR1037

##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outpu...

SKU: DF-DFR1035 · MPN: DFR1035

##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal out...

SKU: PH-106133 · MPN: 106133

The Power Bank KeepAlive (USB-C) prevents power banks from automatically shutting off when connected to low-power devices. It uses a 555 timer circuit to pulse a small amount of current through the USB-C port, keeping the power bank active even when drawing minimal power. This assembled SMD vers...

SKU: AF-6478 · MPN: ADA6478

This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather than estimating from VOCs, and the onboard SHT41 helps improve the CO2 measuremen...

SKU: DF-TEL0119

The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable positioning accuracy down to 2.5m. Featuring both USB and TTL interfaces, this mo...

SKU: DF-ROB0128

The Devastator is a tracked tank-style mobile robot platform built from high-strength aluminium alloy. This version 2 features upgraded metal DC gear motors for improved speed, torque, and durability compared to the original plastic-motor design, along with a load capacity of up to 3 kg. The mod...

SKU: DF-SEN0205

A photoelectric liquid level sensor that uses optical principles to detect the presence or absence of liquid. With no moving parts, it requires minimal calibration and offers high sensitivity and long service life. The corrosion-resistant polycarbonate probe handles temperatures from −25 °C to 10...

SKU: AF-2837

A mid-density RGBW NeoPixel strip with 60 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 30 ...

SKU: AF-2824

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available at 144 LED/m dens...

SKU: AF-2848

An ultra-high-density RGBW NeoPixel strip with 144 individually addressable LEDs per metre on a flexible black PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. The dedicat...

SKU: AF-2832

An RGBW NeoPixel strip with 30 individually addressable LEDs per metre on a flexible white PCB. Each pixel contains four LED elements — red, green, blue, and a dedicated white — providing 32-bit colour control and superior white output compared to RGB-only strips. Also available with a black PCB ...

SKU: AF-1507

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible white PCB with white mask. Each pixel offers full 24-bit colour control, and only a single data pin is needed to drive the entire strip. Also available with a black PCB. The strip comes...

SKU: AF-1460

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 5-metre length (150 LEDs total). Each pixel offers full 24-bit colour control with only a single data pin required. Also available in 1-metre and 2-metre lengths. The strip is 12...

SKU: PR-PIM094

This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...

SKU: AF-1460-2552

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The lower pixel density makes this strip ideal for longer runs where tight spacing isn't needed. The strip is...

SKU: DF-DFR0760

The Gravity Speech Synthesis Module converts text to spoken audio in English and Chinese, including mixed-language content. It connects via I2C or UART using the standard Gravity interface and includes a built-in speaker, so no additional audio hardware is needed. The module supports text contro...