All Products

SKU: PL-1928

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST RCY connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1″ housings onto 16-28 AWG wires to make custom cables. The crim...

SKU: PL-1930

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard headers and solderless breadboards. Key Features 0.1" (2.54mm) Pitch – Compatib...

SKU: PL-1962

This #4-40, pan-head screw is 1/2″ (0.5″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1985

Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.

SKU: PL-967

This single-row, 40-pin right-angle male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any length you need, and the right-angle orientation is ideal for low-profile connections where vertical clearance is...

SKU: PL-1017

This single-row, 7-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. The fixed 7-pin length suits various breakout boards and modules. Standard 0.1" ...

SKU: PL-1026

The 0.100″ (2.54 mm) 2×6-Pin Straight Female Header is a double-row, 12-pin socket strip designed to mate with standard 0.1″ pitch male headers. Its 2×6 layout provides a compact, medium-density connection suitable for a variety of embedded applications. A 12-pin dual-row configuration is common...

SKU: PL-1025

The 0.100″ (2.54 mm) 2×5-Pin Straight Female Header is a double-row, 10-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×5 configuration is one of the most widely used dual-row sizes, matching standard 10-pin ribbon cable connectors and programming headers. This pin...

SKU: PL-1028

The 0.100″ (2.54 mm) 2×8-Pin Straight Female Header is a double-row, 16-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×8 layout is a versatile medium-density connector used across a wide range of embedded and prototyping applications. A 16-pin dual-row configurati...

SKU: PL-1037

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other single-board computers, making it an essential connector for SBC projects. The 2×...

SKU: PL-1065

This single-row, 40-pin straight male header strip with 0.1" (2.54mm) pitch features extended pins on both sides of the plastic spacer. The breakaway design lets you snap or cut it into any length you need. Unlike standard male headers where one side is short (for soldering), this double-sided v...

SKU: PL-1076

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-2128

The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) version. It is a drop-in replacement for the original carrier in most applications...

SKU: PL-2145

The HD-1600A analog servo from Power HD is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.Key specs at 6 V: 0.10 sec/60°, 18 oz-in (1.3 kg-cm), 6.0 g.

SKU: PL-1152

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...

SKU: PL-1155

A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your project. Key Features 6-Cell Capacity – Holds six AA batteries in series Enclosed ...

SKU: PL-1166

These 0.1 μF 100 V ceramic capacitors have many uses, including noise suppression on motors.

SKU: PL-2267

A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...

SKU: PL-1403

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is 20.0 x 6.4 x 10.2 mm, ...

SKU: PL-1406

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.