All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 41-60 of 992 products · 723 unavailable products hidden
Drum HAT
The Drum HAT adds 8 capacitive touch drum pads with individual LED indicators to your Raspberry Pi. Use it to play sampled drum sounds, control software drum synths, send MIDI commands to hardware drum machines, or build custom drum-controlled projects — all programmed in Python. Each pad featur...
MotoMama
MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,...
Otto Kit
Build a functional, interactive Otto-style robot with a bundled set of electronics for sensing, movement, control and power. This kit is designed to help you assemble a robot that can detect objects in its path and move using compact servo motors.An ultrasonic distance sensor lets the robot sense...
noise:bit
Add sound to your micro:bit projects with noise:bit, a tiny speaker board made for bleeps, bloops, tones and speech.Just slot in your micro:bit and use the sound generation blocks and code in Microsoft MakeCode or MicroPython to create audio in your project. It is handy for simple sound effects, ...
WiFi Mini
The RedBearLab WiFi Mini is a compact development board based on the Texas Instruments CC3200 — the industry's first single-chip ARM Cortex-M4 microcontroller with built-in WiFi connectivity. No prior WiFi experience is needed to get started with wireless projects. With on-chip WiFi, internet pr...
touch:bit
Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot. Just slot in your micro:bit, then code touch:bit with the block-based Mic...
4K Webcam
A 1080p USB webcam with a built-in noise-reducing microphone and automatic light correction. The camera adjusts to dim or backlit conditions to produce a clear image, making it suitable for video calls in a variety of environments. The universal clip mount attaches securely to laptop screens and...
Teensy 4.0
The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same size as the Teensy 3.2 — it delivers exceptional processing power with a dual-issu...
enviro:bit
Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code ...
scroll:bit
scroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your micro:bit, or for animations, graphs, and more! Just slot in your micro:bit, then code scroll:bit with the block-based Microsoft MakeCode editor, or with MicroPython...
PicoSystem
PicoSystem is a pocket sized handheld games console, built around Raspberry Pi's RP2040 chip (that's the little fella that's the core of a Raspberry Pi Pico).We've taken these lucky bits of silicon to the component spa and treated them to the full works: a big chunk of flash memory, a vibrant 240...
WiFi Micro
The RedBearLab Wi-Fi Micro is a compact development board built around the Texas Instruments CC3200, the industry's first single-chip ARM Cortex-M4 microcontroller with built-in Wi-Fi connectivity. It combines an 80 MHz application processor with a dedicated ARM-based Wi-Fi network processor, so ...
Touch pHAT
Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...
Bar Magnet
This rectangular magnet is a simple educational tool for learning about magnetism in hands-on activities.It is ideal for hobbyists and children exploring magnetic poles, attraction and repulsion. Each end is marked with “N” or “S” to identify the north and south poles.Specifications:Type: Childre...
PCB holder
This flat, dense PCB holder is designed to keep your circuit board steady while you work. Its low-profile vise style lets your hands rest directly on the work table, making it easier to steady yourself during precise soldering and probing.A thick metal plate helps keep the holder from moving arou...
Loop cable
This is a simple loop cable supplied with a 5.2mm ring and matching fastening hardware.It is useful when you need a cable with a ring-style end for a project, repair, or replacement part.Includes:1 x Cable with 5.2mm ring3 x Screws3 x Nuts
Third Hands
This handy third hand tool helps hold small parts steady while you solder, inspect, glue or assemble detailed projects. It is well suited to electronics work, lab tasks, jewellery making and other precision jobs where an extra pair of hands makes life easier.The heavy iron base keeps the stand st...
pi-topPROTO
The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of space available to build circuits that can interact with your pi-top — as well as a full 40-pin GPIO on top for a desired Raspberry Pi HAT — the pi-topPROTO makes a great add...
Rainbow HAT
Rainbow HAT has a buffet of sensors, inputs and displays to explore Android ThingsTM. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. We've worked with the Android Things team at Google to create this great add-on board that features...
PIR in case
A compact passive infrared (PIR) motion sensor housed in a protective case with a 45cm cable. Detects motion within a 6-metre range and 120° field of view, making it ideal for security systems, automatic lighting, and automation projects. Key Features Wide Voltage Range – Operates from 5V to 2...
