All Products
Showing 41-53 of 53 products · 7 unavailable products hidden
5V 10W Solar Panel - ETFE
USB to 5.5mm/2.1mm DC Booster Cable - 9V or 12V Output
SMA Jack to RP-SMA Plug RF Adapter
6 x AA battery holder with 5.5mm/2.1mm plug
RP-SMA Jack to SMA Plug RF Adapter
5V 4A (4000mA) switching power supply - UL Listed
5V 2A (2000mA) switching power supply - UL Listed
DC Barrel Jack Plug - Male
DC Barrel Jack Adapter - Breadboard Compatible
12 VDC 1000mA regulated switching power adapter - UL listed
9V Snap Connector
Arduino Power Supply 9VDC 500mA
9V Battery snap - Standard
5V 10W Solar Panel - ETFE
This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...
USB to 5.5mm/2.1mm DC Booster Cable - 9V or 12V Output
This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will give you a higher DC voltage! It's a handy way to power a 9V or 12V device. Unlike our other 'USB booster' cables, this one comes with ...
SMA Jack to RP-SMA Plug RF Adapter
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...
6 x AA battery holder with 5.5mm/2.1mm plug
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...
RP-SMA Jack to SMA Plug RF Adapter
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...
5V 4A (4000mA) switching power supply - UL Listed
This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...
5V 2A (2000mA) switching power supply - UL Listed
This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...
DC Barrel Jack Plug - Male
This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.Do...
DC Barrel Jack Adapter - Breadboard Compatible
This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.Documents:Dimensional Drawing
12 VDC 1000mA regulated switching power adapter - UL listed
Warning: This is a US-plug adapter and is not certified for use in Australia. Only purchase if you are using it outside Australia or with an appropriate plug adapter. A regulated 12V DC switching power adapter delivering up to 1000mA (1A). The slim profile fits into power strips without blocki...
9V Snap Connector
A classic 9V battery snap connector terminated with a 2-pin polarised Molex connector. Ideal for quick-connect battery power in breadboard and prototyping setups. Key Features Molex Terminated – 2-pin polarised connector for secure, reversible connections Cable Length – 5 inches (approximatel...
Arduino Power Supply 9VDC 500mA
Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a high efficiency circuit, built in EMI filter, short circuit protection, over cur...
9V Battery snap - Standard
A standard-quality 9V battery clip with flylead connections. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs for reliable everyday use. Specifications Cell Type – 9V Output Connection – Flyleads Cable Length – 150 mm Also Available 9V Battery Snap ...