All Products

SKU: ED-IP-DO · MPN: IP-DO

DO-CAM folds down to something you can slide into a laptop bag, which makes it the visualiser for staff who teach in four different rooms a week rather than one. Unfold it, plug in the USB cable, and it works — no software install, no setup ritual before the bell.Image qualityAn 8MP Sony sensor c...

SKU: ED-IP-MC1 · MPN: IP-MC1

The cheapest way to give a student a visualiser is to use the laptop they already have. Mirror-Cam clips over the built-in webcam and uses an angled mirror to reflect the keyboard area, so the webcam captures whatever sits in front of the laptop — a workbook, a diagram, a sum being worked through...

SKU: ED-IP-UP · MPN: IP-UP

Most teachers already carry a very good camera in their pocket. Uplift is the stand that turns it into a visualiser. Clamp the phone in, swing the arm over the desk, and whatever is underneath can be shared with the class or a video call.Holds the angle you setThe multi-jointed arm adjusts on the...

SKU: ED-IP-V4K-PRO-120 · MPN: IP-V4K-Pro-120

Wide enough for an A3 spreadThe V4K PRO 120 is the IPEVO to reach for when the thing you're showing is bigger than a single page. Its 120° wide-angle lens covers a tabloid (A3) capture area, so a full worksheet spread, a poster, or a group of students' work all fits in frame without anyone shuffl...

SKU: ED-IP-V4K · MPN: IP-V4K

The IPEVO V4K turns any laptop into a classroom visualiser. Plug it into a USB port, point it at whatever is sitting on the desk, and the whole room sees it on the projector or interactive panel — a worked algebra problem as you write it, a page of a student's book work, or the inside of a device...

SKU: ED-IP-VZ-R · MPN: IP-VZ-R

The VZ-R is the IPEVO visualiser that doesn't need a computer. Run the HDMI output straight into a projector, monitor or interactive panel and it projects live — useful when the classroom PC is slow, locked down, or simply not there. Plug the USB lead into a laptop instead and it behaves as a sta...

SKU: ED-IP-VZ-X · MPN: IP-VZ-X

Three ways to connect — Wi-Fi, HDMI and USB — make the VZ-X the most adaptable visualiser IPEVO builds. Whatever the room already has, this camera will talk to it.Wireless when you want itConnect the VZ-X over Wi-Fi to a Mac, PC or Chromebook, to an iPad, iPhone or Android device, or to an Apple ...

SKU: DF-FIT0957 · MPN: FIT0957

The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 Delta. It converts the onboard IPEX4 connector to a standard SMA female port (ex...

SKU: DF-FIT0833

This gold-plated IPEX to SMA female connector has passed 48 hours salt spray test, which is durable and not easy to rust.It adopts RG1.13 wire material and high-density shielding layer, soft and firm, fold-resistant and durable, with fast and stable data transmission.These IPEX to SMA Female Cabl...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: AF-2167 · MPN: 2167

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to ...

SKU: DF-SEN0503

An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...

SKU: AF-2168 · MPN: 2168

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to IR,...

SKU: AF-164 · MPN: 164

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm and 0.4 V at 80 cm — which can be read directly by an Arduino or other microcont...

SKU: AF-1031 · MPN: 1031

This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire. These sensors are good for detection between 20cm-150cm. For over 1 m distance...

SKU: SF-COM-29198 · MPN: COM-29198

The IRF7509 is a common N- and P-channel MOSFET device for switching higher-power loads from low-power control signals. Its low on-resistance helps reduce losses, while the logic-level gate is suited to control from many 5V microcontrollers or mechanical switches.This surface-mount MOSFET is usef...

SKU: LB-FLAME-LIGHT

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it provides both digital and analogue output for flexible integration with Arduino, Ra...

SKU: SF-GPS-16838

The M1600HCT-P-SMA is a dual-band passive antenna that combines Iridium satellite communication with L1 GNSS reception (GPS and GLONASS) in a single compact unit. Ideal for tracking devices that transmit their position over the Iridium network. Weighing just 11 grams with a built-in O-ring, the ...

SKU: LB-LR0062

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of 2-30 cm at an angle up to 35 degrees.The detection distance can be changed by u...

SKU: AF-157 · MPN: 157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...