All Products

SKU: SF-KIT-24441 · MPN: KIT-24441

Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...

SKU: AF-1877

Super-flexible silicone-sheathed stranded-core wire that handles the heat and abuse that standard PVC wire can't. Rated for temperatures from −60°C to 200°C and voltages up to 600 V, this wire is built for demanding projects. The soft silicone insulation makes this wire extremely supple and easy...

SKU: DF-TEL0111

INTRODUCTION   The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compared to the arduino ESP8266 (the previous generation), the ESP32 has a significant ...

SKU: DF-DFR0162

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and...

SKU: SF-KIT-27214 · MPN: KIT-27214

This LoRaWAN® IoT kit brings together a Digi HX15 Gateway, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board to help you get a connected sensor system running quickly.The included IoT Node ships with firmware that connects to Digi X-ON™, detects a...

SKU: DF-DFR0221

Featured in Make: The Maker's Guide to Boards, DFRobot Leonardo with Xbee Socket is an Arduino Leonardo variant processor.The Arduino Leonardo is based on the ATmega32u4 chip. It is the latest addition to the Arduino family. Compared with the earlier Arduino controllors, by using the ATmega32...

SKU: DF-DFR0144

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each relay has its own test button and LED status indicator. The shield features a b...

SKU: SF-WRL-12847

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using...

SKU: WS-17693

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview  ...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: SF-WRL-15130

After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 200ft indoor range, or ...

SKU: SF-WRL-15131

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft i...

SKU: IT-IM120417005

MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,...

SKU: DF-TEL0092

Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module...

SKU: SF-WRL-15127

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft i...

SKU: SF-WRL-22329 · MPN: WRL-22329

The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...

SKU: LB-00053

A simple breakout board for XBee modules that brings all 20 pins out to standard 0.1″ (2.54 mm) dual-row headers. The 0.5″ spacing between header rows makes it breadboard DIP-friendly for easy prototyping. Key Features All 20 Pins Broken Out – Full access to every XBee pin 0.1″ Header Spacing...

SKU: SF-WRL-15126

After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 200ft indoor range, or ...

SKU: SF-DEV-10406

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure t...

SKU: SF-WRL-15129

After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules, we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can now talk to the modules over UART or SPI as well. With a 300ft i...