All Products

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...

SKU: AF-4111

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by not having to flip the cable around.First let's talk about the cover and over-molding. We got these in custom colors, and if you hav...

SKU: DF-DFR0010

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...

SKU: AF-592

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3969

Make your next custom USB cable a breeze with a USB Mini B Female Socket to 5-pin Terminal Block. If you need to connect to a device with a mini USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required! Just use...

SKU: AF-4211

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or met...

SKU: AF-4105

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: DF-FIT0057

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and portable media devices. This is the cable you need for the DFRduino Nano, arduino FI...

SKU: AF-5523

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach microUSB conn...

SKU: AF-1826

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...

SKU: AF-1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: SF-KIT-23091 · MPN: KIT-23091

Setting up a Pi Zero can mean tracking down a few specific cables and a suitable power supply, so this kit bundles the essentials in one package. It is centred around the compact Raspberry Pi Zero W, a small single-board computer suited to embedded builds and Internet of Things projects.The Pi Ze...

SKU: AF-1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: AF-4472

This USB Type A to Type C cable provides a simple way to connect modern USB-C devices to computers, hubs, and chargers that use the standard USB Type A (rectangular) port. At just 6 inches long, it's perfect for short, tidy connections on your desk or inside enclosures. The cable includes built-...

SKU: SF-PRT-00587

USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.

SKU: SF-COM-14023

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...

SKU: AF-4106

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: AF-1388

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: DF-FIT0601

A lightweight, flexible monocrystalline silicon solar panel with an integrated 5 V voltage regulator and USB Type-A output. The PET-laminated design weighs just 90 g and includes mounting holes and copper clasps for attaching to backpacks or outdoor enclosures. The panel delivers up to 1 A at 5 ...