All Products

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: DF-FIT0869

A 3S (3-series) battery protection module designed for connecting three 18650 or polymer lithium-ion cells in series to create a 12 V rechargeable battery pack. The board provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard your battery pack during charging ...

SKU: AF-4410

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your battery via the JST connector — two LEDs show charging status at a glance (red = ch...

SKU: SF-GPS-26620 · MPN: GPS-26620

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...

SKU: DF-DFR1222 · MPN: DFR1222

Built around Espressif's ESP32-C5, this compact FireBeetle board is designed for smart home, robotics and wider IoT projects that need strong wireless performance with low power use. It combines a 240 MHz RISC-V processor with dual-band 2.4 GHz and 5 GHz Wi-Fi 6, BLE, Zigbee and Thread support.Po...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-1994

This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....

SKU: AF-5369

This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...

SKU: AF-1849

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and everything you need to build interactive sewable projects — no soldering required. ...

SKU: AF-5366

The 6V 2W Solar Panel from Voltaic Systems uses 12 high-efficiency monocrystalline SunPower cells with 22%+ efficiency. Constructed with ETFE (Ethylene Tetrafluoroethylene) coating, this panel is waterproof, scratch-resistant, and UV-resistant — a significant durability upgrade over PET or lamina...

SKU: AF-4237

A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics projects. The battery includes built-in protection circuitry that guards against...

SKU: AF-4236

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...

SKU: AF-2011

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteriesThe batteries ...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: DF-DFR0563

3.7V lithium batteries are commonly used in many projects. However, the remaining power and voltage of the lithium battery are highly nonlinear. We can only roughly judge whether the battery is full or almost empty according to its voltage. The Gravity I2C 3.7V Lithium Battery Fuel Gauge employs...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: LB-00237

A compact 3.7 V 600 mAh lithium-ion polymer (LiPo) battery with a genuine 2-pin JST-PH connector. The battery includes built-in protection circuitry against overcharge, over-discharge (cuts off at 3.0 V), and short circuits. The genuine JST connector clicks smoothly in and out of matching jacks w...

SKU: AF-1578

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: AF-1304

The Adafruit Micro Lipo is a tiny USB charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Its gold-plated PCB-style USB connector plugs directly into any USB port — connect your battery via the JST plug and charging begins automatically. Two LEDs indicate sta...

SKU: AF-5723

The Feather RP2040 with USB Type A Host adds a full USB Type A port to the Feather, letting you connect USB devices like keyboards, mice, flash drives, and serial peripherals. The USB host functionality is achieved through the RP2040's PIO peripheral, which emulates a USB host controller while ke...