All Products

SKU: DF-EDU0170

The Gravity Science Data Acquisition Module Kit is a comprehensive toolkit for conducting digital scientific experiments without programming or electronics knowledge. Built around the DFRobot SCI DAQ module, it includes four sensors covering soil moisture, ambient light, temperature/humidity, and...

SKU: AF-5030

If you've got a computer or laptop with a USB C port, but you're itching to use one of our fancy new Trinkeys, this adapter will do an excellent job at turning that USB Type C port into a USB A port!Works great with any device that has a USB C port. These adapters don't magically give you USB C s...

SKU: WS-28945 · MPN: 28945

The Waveshare 15.6" FHD Monitor (C) is a portable touchscreen display with 1920×1080 IPS panel, 10-point capacitive touch, and a built-in 10,000mAh battery providing 3–4 hours of untethered use. The screen is optically bonded to toughened glass with 6H hardness, reducing glare and improving touch...

SKU: LB-PT91063

This cable is prefect for connecting your Micro:bit to you computer using USB-C.  With USB-C becoming standard this is a very handy cable for connecting your Micro:bit, Shakeup or Pico directly to you computer without needing an adapter.Type C To Micro USB charge cord, the maximum current...

SKU: LB-LS3700

Introducing our 3 in 1 USB Hub, the perfect solution for expanding your USB connectivity! This compact and lightweight hub features 3 USB-A ports, allowing you to connect multiple devices simultaneously. Made from durable ABS material, it is designed to withstand daily use. With a weight of only ...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: AF-4108

A straight USB Type C male plug designed for building custom USB cables with DIY ribbon cable kits. Attach this plug to one end of a compatible ribbon cable using the flex cable clip — no soldering required. Mix and match different USB plug types on each end to create the exact cable you need. K...

SKU: SF-DEV-19426

The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-enabled sensors — no coding required. Simply plug in a compatible sensor, power up...

SKU: AF-4109

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: AF-5627

A curated electronics kit built around the Adafruit CLUE board and PyLeap — Adafruit's app for wirelessly transferring code and assets from the Learn system directly to your device. No complicated setup or USB cable needed for programming once you're connected via Bluetooth. The CLUE board packs...

SKU: SF-CAB-21739

A 300mm (1 foot) SMA male to TNC male cable with injection-moulded stress-relief boots. Built with SYV-50-3 cable for an excellent balance of low signal loss and high flexibility — chosen over RG58 for superior performance at GNSS frequencies. Ideal for connecting RTK development boards to high-...

SKU: AF-4106

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: SF-CAB-25629

Upgrade your connections with this durable USB-A to Micro-B 2.0 cable! This 1-meter (3.2-foot) cable boasts a flexible silicone coating for easy management and tangle resistance. Perfect for connecting your devices with convenience.If you're trying to wrap your head around the world of USB cables...

SKU: RP-SC0889 · MPN: SC0889

The Raspberry Pi Debug Probe is a USB-to-debug adapter designed for solderless, plug-and-play debugging and programming of Raspberry Pi Pico and RP2040-based boards. It provides both a serial wire debug (SWD) interface and a UART interface, each using the Raspberry Pi 3-pin debug connector. Base...

SKU: DF-KIT0131 · MPN: KIT0131

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.

SKU: DF-FIT0819

A waterproof USB endoscope camera with a 3-in-1 connector (USB, Micro USB, and USB-C) for use with computers, Android phones, Raspberry Pi, NVIDIA Jetson, LattePanda, and other single-board computers. The 8 mm lens diameter and 5-metre semi-rigid cable let you inspect narrow, dark, and hard-to-re...

SKU: DF-DFR1136 · MPN: DFR1136

This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....

SKU: LB-LS0295

This USB endoscope inspection camera is a practical tool for looking into hard-to-reach spaces during repairs, maintenance and troubleshooting. Its slim 7mm camera head and flexible waterproof cable make it useful for damp or confined areas such as pipes, engine bays, wall cavities and machinery....

SKU: DF-TOY0086

The Boson Starter Kit pairs DFRobot's modular Boson electronic blocks with the BBC micro:bit, giving students and beginners a hands-on introduction to coding and electronics. The kit includes eight sensor and actuator modules covering sound, light, and motion interaction. Modules connect to the ...