All Products

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: AF-4739

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. It's great for supplying power to popular 5V voltage circuits from a range of battery or power options.  This chip provides up to 1.2 Amp load current acr...

SKU: AF-5705

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member of the fourth generation of Witty Pi, and it is designed to work with 3.7V Lith...

SKU: AF-2190

The VERTER is a buck-boost DC-DC converter that accepts 3–12 V input and outputs a stable 5.2 V — ideal for powering Arduino, Raspberry Pi, and other 5 V electronics from a wide variety of battery packs. The slightly elevated 5.2 V output provides headroom for voltage drop across USB cables and c...

SKU: LB-LS6795

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W). With a USB-C output, it’s perfect for powering devices like Raspberry Pi, Ard...

SKU: DF-DFR1208 · MPN: DFR1208

##Introduction This DC-DC step-down converter module is designed to efficiently reduce a high input voltage (15-24V) to a stable 12V output, supporting up to 12A of current. The module offers high conversion efficiency (over 95%), with minimal ripple noise (under 50mV), making it suitable for pow...

SKU: SF-COM-18732 · MPN: COM-18732

When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...

SKU: TB-MP3480

The Jaycar MP-3480 is a compact, regulated 5VDC 3A switchmode plug pack with a slim profile designed to fit side-by-side on a powerboard. It accepts 100–240VAC 50/60Hz input (AU/NZ 2-pin plug) and comes with 7 interchangeable DC output plugs to suit a wide range of devices. Australian safety app...

SKU: DF-DFR0946

A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage and maximum current independently. Specifications Input Voltage – 6–35V DC Ou...

SKU: LB-LR0214-142A

One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly converter to the output) PCB board size: 4.5cm * 4.5cm With red power indicator le...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: AF-4114

The Zero2Go Omini is a multi-channel power supply board that sits on top of any Raspberry Pi with a 2×20 header. It accepts up to three separate power inputs and automatically selects the one with the highest voltage, making it perfect for projects that need backup power or flexible power source ...

SKU: DF-DFR1026

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...

SKU: AF-3877

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioning signals. Spec'd for 5V operation but works at 3V as well. High-level inputs ...

SKU: LB-AAA-BATTERY

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. Good up to 200mA. Short circuit protected. This board has AAA battery clips but ...

SKU: DF-FIT0145

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...

SKU: AF-6091 · MPN: ADA6091

The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry support, adjustable charge rates, smart power path management, and near-MPPT so...

SKU: AF-6092 · MPN: ADA6092

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, combining power path management and regulated output in a single board. Con...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-6106 · MPN: ADA6106

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V supply from a single-cell LiPo battery, eliminating the need for a separate voltag...