All Products

SKU: SF-TOL-09163

A convenient 15-gram tube of lead-free solder, ideal for electronics projects, repairs, and prototyping. The SAC305 alloy (96.5% tin, 3.0% silver, 0.5% copper) provides strong, reliable joints with excellent wetting characteristics. Key Features Lead-Free (Pb-Free) – RoHS-compliant SAC305 allo...

SKU: AF-2473 · MPN: 2473

A 50 g spool of lead-free solder wire ideal for through-hole and surface-mount soldering. With a 0.5 mm diameter and no-clean rosin flux core, this wire delivers clean, reliable joints without the need for post-solder cleaning. This Sn99.3/Cu0.7 formulation meets RoHS compliance standards, makin...

SKU: AF-1930 · MPN: 1930

A 50 g spool of lead-free SAC305 solder wire in a fine 0.5 mm (0.02″) diameter — ideal for both through-hole and SMT soldering work. The no-clean rosin core flux makes for clean joints without the need for post-solder cleaning. SAC305 is a widely used RoHS-compliant lead-free formulation, making...

SKU: AF-6014 · MPN: ADA6014

This compact breakout board is designed for the Raspberry Pi 5 and Adafruit RP2350 boards that use an HSTX connector. These boards use a 22-pin FPC connection to carry high-speed video data over differential pairs, and this breakout gives you a handy way to adapt that interface for a custom setup...

SKU: AF-6357 · MPN: ADA6357

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for frictionless rotary encoders and contactless potentiometer-style controls.Magnetic a...

SKU: AF-716 · MPN: 716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: AF-1507 · MPN: 1507

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible white PCB with white mask. Each pixel offers full 24-bit colour control, and only a single data pin is needed to drive the entire strip. Also available with a black PCB. The strip comes...

SKU: AF-1506 · MPN: 1506

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible black PCB with black mask. Each pixel offers full 24-bit colour control, and only a single data pin is needed to drive the entire strip. The strip comes in a 1-metre length with weather...

SKU: AF-4970 · MPN: 4970

I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...

SKU: AF-1249 · MPN: 1249

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (simp...

SKU: AF-259 · MPN: 259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-2746 · MPN: 2746

The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with iOS and Android devices — no special iOS certification required. The shield conn...

SKU: AF-1248 · MPN: 1248

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (s...

SKU: AF-1250 · MPN: 1250

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (simp...

SKU: AF-3127 · MPN: 3127

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in white adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, an...

SKU: AF-3131 · MPN: 3131

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in yellow adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, a...

SKU: SF-DEV-17852 · MPN: DEV-17852

Add portable power and sound to your BBC micro:bit projects with this lightweight add-on PCB. It fits snugly against the micro:bit and includes a built-in buzzer plus a 3V coin cell holder, making it well suited to wearable projects, badges and handheld builds.This V2 board has been redesigned to...

SKU: LB-LS0299

This multifunctional third hand soldering stand combines adjustable crocodile clip clamps, LED lighting, and a dual magnifying lens to keep your hands free while soldering, assembling, or inspecting small components. The weighted base with a steel plate provides extra stability, and it can be po...