All Products

SKU: DF-FIT0269

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: SF-PRT-22640

This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The front and rear plates are attached with screws. The enclosure is roughly ~2mm th...

SKU: AF-4685

A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without interfering with antennas or magnetometers. They can also be easily filed down to cu...

SKU: SF-PRT-10462

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-conductive, won't short circuit boards 4-40 Thread – Standard tapping for 4-40 screw...

SKU: DF-FIT0339

A 5-piece hex driver set with interchangeable screwdriver heads and an aluminium alloy CNC-machined handle. The HSS high-alloy steel tips are wear and distortion resistant, making this set ideal for precision work on electronics, RC helicopters, drones, and small mechanical assemblies. The handl...

SKU: PL-1962

This #4-40, pan-head screw is 1/2″ (0.5″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-PRT-10739

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a set of ten.

SKU: SF-PRT-19296

This is a 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.MicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic ‘key’ on the M.2 connector to prevent a user from inserting an...

SKU: AF-4807

An acrylic faceplate and hardware kit for the Adafruit MagTag. The kit includes two front plate options — a red arrow and a white cloud — plus a back plate and all the nylon mounting hardware needed for assembly. Takes just a few minutes with a Phillips screwdriver. Key Features Two Faceplate ...

SKU: DF-FIT0195

A 10-pack of M3 × 6mm clear nylon screws with matching nuts. Transparent and non-conductive, these fasteners are ideal for applications requiring electrical insulation, corrosion resistance, and a clean visual appearance. Key Features Clear Nylon – Transparent material for a discreet, clean lo...

SKU: PL-1955

A pack of 25 steel, zinc-plated pan-head Phillips machine screws in the #2-56 thread size, 6.35 mm (1/4″) long. Commonly used in robotics, electronics enclosures, and small mechanical assemblies. Specifications Thread – #2-56 UNC (≈2.18 mm diameter, 0.45 mm pitch) Length – 6.35 mm (1/4″) Hea...

SKU: SF-ROB-11965

A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...

SKU: DF-FIT0066

A 10-pack of M3 × 10mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. Lightweight and easy to work with, these standoffs suit any pro...

SKU: DF-FIT0194

A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. The male/female design allows standoffs to be stacked for even ...

SKU: PL-2698

M3 Phillips head machine screws, 16 mm long. A common fastener size used in electronics enclosures, 3D printer assemblies, robotics builds, and general prototyping. Sold in a pack of 25. Specifications Thread Size: M3 (3 mm) Length: 16 mm Head Type: Phillips Quantity: 25 Ideal For Electr...

SKU: SF-TOL-25566 · MPN: TOL-25566

Use this precision Phillips #00 screwdriver for DIY or professional small electronics repair. The Phillips #00 screw is the most commonly used fastener in the internals of consumer electronics, game consoles, laptops, PC desktop computers, and small home appliances. This particular size of Philli...

SKU: DF-DFR0216-R

This DIN Rail Mount Bracket provides quick and easy mounting for Arduino, which allows you to conveniently build up your Arduino-related projects. Made of high-quality PVC material, it is durable and fireproof, and well suitable for the boards like UNO R3 and Leonardo. Application Dimension...

SKU: PL-1959

A pack of 25 steel machine screws in the #2-56 thread size with a 1-1/4″ (31.75 mm) length. These pan-head Phillips screws are zinc-plated for corrosion resistance and are commonly used in robotics, electronics enclosures, and small mechanical assemblies. Specifications Thread Size – #2-56 Le...

SKU: SF-PRT-26989 · MPN: PRT-26989

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from the benchtop, reduce accidental shorts, or create a cleaner mechanical mounting ...

SKU: DF-FIT0065

A 10-pack of M3 × 6mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. At just 6mm height, these are suited for low-profile mounting wh...