All Products

SKU: LB-LR0589-RED

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 12 ...

SKU: AF-5844 · MPN: ADA5844

The RJ-12/RJ-11 Telephone Round Panel Mount Extension Cable provides a simple way to add a panel-mount telephone connection to project enclosures. The round panel-mount design fits a standard drilled hole of approximately 30 mm — no custom oval or square cutouts required. Unscrew the plastic nut...

SKU: LB-LS3381-R

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary A...

SKU: SF-TOL-18374 · MPN: TOL-18374

A panel-mount DC current and voltage meter is a handy addition when you need to keep an eye on a system continuously, rather than grabbing a DMM for quick checks. It is useful for battery-backed projects, power supplies and other DC systems where voltage and current draw matter.This combination m...

SKU: AF-6073 · MPN: ADA6073

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or drilling required. The other end has a convenient wire pigtail with power, ground,...

SKU: AF-5859 · MPN: ADA5859

If you need to add a panel-mount connection for telephone-interfacing projects but don't have the time or ability to cut a custom oval or square hole, this RJ-12 or RJ-11 Telephone Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing phone kit. It's about 30mm in diame...

SKU: AF-3691

You've done such a great job making your own electronic control panel that the last thing you need are those wires to get pulled out and frizzy. These fancy Panel-Mount Banana Jacks look good and work well. They will snugly hold onto any 4mm banana plug or cable, and have a c...

SKU: AF-1729

This panel-mount RCA cable provides a clean, permanent composite video or audio connection for enclosures and project boxes. Two RCA connectors (one panel-mount, one plug) are joined by a 264 mm (10.4″) cable, with two mounting screws spaced 20 mm apart for secure panel installation. Ideal for c...

SKU: AF-4261

A round panel-mount USB-C pass-through adapter that lets you add a USB-C port to any enclosure using a simple drilled hole — no custom oval or square cutouts required. At approximately 30mm diameter, a standard hole saw or drill bit is all you need. Both sides feature a USB-C jack with full pass...

SKU: AF-4260

A round panel-mount adapter that provides a USB-C socket on the outside and a Micro USB socket on the inside. At approximately 30 mm in diameter, it fits a standard round drill hole — no custom oval or square cutouts needed. Simply drill, insert, and secure with the included plastic nut. Ideal f...

SKU: AF-6153 · MPN: ADA6153

USB-C Panel Mount Cable – Compact & Easy InstallationThis USB Type-C panel mount cable is perfect for adding a USB-C connection to your project enclosure. The compact panel-mount side features a USB-C jack, while the other end provides power, ground, D+/D-, and CC1/CC2 lines for quick integration...

SKU: PI-CAB0903

A 50 cm panel mount HDMI extension cable for exposing an HDMI port on the outside of an enclosure or project box. One end features a panel-mount HDMI female socket with mounting holes, while the other end is a standard HDMI male connector. Specifications Connector (Panel Side) – HDMI female wi...

SKU: AF-936

A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port to project enclosures for devices with Mini-B USB connections. Key Features Pa...

SKU: AF-3221

This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding whether or not to use this mini toggle switch? That's the easiest decision you'll make all day! This Mini Panel Mount SPDT ...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: PI-PIM724 · MPN: PIM724

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP2350 board with all the extras baked in. With Pimoroni Pico boards, we've tried ...

SKU: AF-6116 · MPN: ADA6116

USB C to USB B Round Panel Mount AdapterNeed a panel-mount USB C connection but don't want the hassle of cutting custom shapes? This USB C plug to USB B socket adapter makes it easy! With a 30mm diameter, you can simply drill a round hole using a standard hole saw or drill bit—no complex cutting ...

SKU: AF-4211

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or met...

SKU: SF-CAB-15455

This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 18mm apart.

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.