All Products

SKU: AF-5329

If your computer has a USB A port still, and you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the job nicely. It's quite simple - you've got your USB A plug on one side, a C plug on the other. Since C is reversible, you can always plug in your board...

SKU: AF-5524

This is a magnetic USB Type C plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your USB C power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach USB C connector w...

SKU: AF-67

A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and use the switch to control power. Key Features On/Off Switch – Conveniently co...

SKU: AF-5523

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach microUSB conn...

SKU: AF-4287

A push-fit DC barrel jack adapter that converts a 3.5/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Simply push it onto the smaller plug until it clicks into place — no soldering or tools required. Key Features Click-Fit Connection – Push onto the plug until it clicks secure...

SKU: DF-FIT0253

A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...

SKU: AF-369

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (w...

SKU: AF-875

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. Use alkaline AAs for approximately 12V at 3000–4000 mAh, or rechargeable NiMH cel...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...

SKU: AF-5457

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will give you a higher DC voltage! It's a handy way to power a 9V or 12V device. Unlike our other 'USB booster' cables, this one comes with ...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: AF-4212

If you need to add a panel-mount connection for USB B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal wi...

SKU: AF-3535

A VGA to HDMI converter that takes an analogue VGA video signal and 3.5 mm stereo audio input and combines them into a digital HDMI output. Ideal for connecting older VGA-output computers, game systems, or other devices to modern HDMI monitors, televisions, and projectors. The adapter is powered...

SKU: WS-24166 · MPN: 24166

The 6W Monocrystalline Solar Panel from Waveshare delivers 5.5V output through high-efficiency monocrystalline silicon cells, encased in toughened glass for durability and weather resistance. It features both Micro USB and USB Type-C output interfaces (via adapter) with a 3-metre cable for easy c...

SKU: AF-3972

Make your next custom USB cable a breeze with a USB Micro B Male Plug to 5-pin Terminal Block. If you need to connect to a device with a micro USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required! Just use a sm...

SKU: SF-PRT-10288

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

SKU: AF-658

This 5V 10A Switching Power Supply delivers up to 50W of stable DC power, making it ideal for driving LED strips, motors, CNC projects, and other power-hungry 5V devices. It accepts both 110V and 220V AC input, so it works worldwide with the appropriate mains cable. The output connects via a sta...

SKU: AF-4213

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this Micro USB B Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or ...

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: DF-DFR0379

A 20W adjustable DC-DC buck converter module based on the LM2596 step-down regulator, featuring a built-in digital display that shows the output voltage in real time. Adjust the output from 1.25V to 37V using the onboard potentiometer — no multimeter needed. Wire terminals mean no soldering is re...