All Products

SKU: AF-3090

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...

SKU: AF-860

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, it's got everything a big LED matrix has, but bite sized! 64 bright yellow LEDs are contained inside the plastic body, in an 8x8 matrix. There are 16 pins on the side, 8 on each, with 0.1" spacing so yo...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: AF-1046

Make a scrolling sign, or a small video display with this 8x8 gridded yellow-orange LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the side, 8 on each, with 0.1" spacing so you can easily plug it into a breadboard wit...

SKU: AF-4745

The Adafruit Matrix Portal is a plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by an ATSAMD51 (Cortex M4) with an ESP32 WiFi coprocessor, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start coding in CircuitPy...

SKU: AF-3162

These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Warm White version. Check out ou...

SKU: DF-SER0046

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...

SKU: AF-1819

This 1.2″ 8×8 LED Matrix features 64 yellow LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1″ pin spacing — eight pins on each side. The matrix requires 1:8 multiplex dr...

SKU: PI-COM0510

The Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been manufactured by Lite-On. They're available in two suitably retro colours - red or green - and each display has 5x7 pixels, plus a decimal point. The matr...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: DF-SEN0337

TOF Sense is a TOF-based (Time of Flight) laser ranging sensor that offers 1cm-5m detection range, 1mm resolution, ± 1.5cm error, and 10Hz data update frequency. The sensor supports 15 ° ~ 27 ° adjustable FOV, UART and CAN communication (selected by setting). Besides, it allows users to actively ...

SKU: AF-6484 · MPN: ADA6484

This compact full-colour display panel provides a dense 128 × 64 pixel matrix for showing text, graphics and simple animations in projects where you want a high-resolution LED display.Resolution: 128 × 64 pixelsLED type: RGB LED matrixPixel pitch: 2mmFormat: panel-style displayThe fine 2mm pitch ...

SKU: AF-3088

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two shared pins — leaving all other GPIO free for sensors, buttons, and additional disp...

SKU: AF-4728

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...

SKU: WS-24985

Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo, Compatible With Various Transmission Parts Metal Flat Key Shaft Flange Plate Using with serial bus servo for driving various transmission parts Dimensions ...

SKU: AF-4767

Here's a handy power cable for the RGB LED Matrix Panels we carry.Easily plug into the back of your RGB matrix and insert or screw the power and ground cables onto either the Matrix Portal or the Matrix Bonnet, or whichever microcontroller-and-add-on you're using for your RGB Matrix project.Works...

SKU: PL-3434

This is a full set of replacement gears for the Power HD High-Torque Servo 1501MG.

SKU: DF-FIT0348

This industrial-grade pH combination electrode features a sensitive glass membrane with low impedance, delivering fast response times, good thermal stability, and excellent reproducibility across the full 0–14 pH range. The Ag/AgCl gel electrolyte reference system provides a stable half-cell pote...