All Products

SKU: WS-15423

The RPi Relay Board (B) is an 8-channel relay expansion board for Raspberry Pi, giving your Pi the ability to switch high-voltage loads such as home appliances, lighting, motors, and other AC/DC devices. Each relay handles up to 5A at 250V AC or 30V DC, with photo-coupled isolation to protect the...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: PI-COM0409

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.Documents:Dimensional Drawing

SKU: SF-COM-09276

This heavy-duty SPST toggle switch provides simple on/off control for power circuits and panel-mounted applications. Rated for 2 A at 250 V AC or 4 A at 125 V AC, it's suitable for both mains-voltage and low-voltage projects. Includes a face plate and two threaded nuts for secure panel mounting. ...

SKU: SF-COM-09609

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC.This switch is just a bit smaller than our popula...

SKU: AF-1440

A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: LB-LR0589-BLUE

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in blue. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press 12...

SKU: SF-COM-00100

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VAC, 30VDC).

SKU: TB-PS0376

A 4-pin mini DIN panel-mount socket (S-Video / S-VHS type) with nickel-plated copper construction. The socket requires a 10mm panel cutout and uses solder tag termination for secure, permanent connections. Specifications Type – Mini DIN 4-pin (S-Video) socket Pins – 4 Case Material – Nickel-...

SKU: LB-LS6460

A battery box with a built-in 130 DC motor and on/off switch — a simple, self-contained power and drive unit for beginner robotics, model vehicles, and STEM projects. Just add batteries and connect to your build. Specifications Motor – 130 DC motor Voltage – 3–6 V (depending on battery config...

SKU: AF-1479

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-3219

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic yellow protective casing, and a yellow LED at the tip of the switch, this Yellow LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control panels, no...

SKU: AF-3306

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic blue protective casing, and a diffused blue LED at the tip of the switch, this Blue LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control pa...

SKU: AF-3218

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control panels, n...

SKU: AF-2013

Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary encoder or any of our panel mount potentiometers. Swap this in during your build or...

SKU: AF-1097

A simple 4-channel 315 MHz RF receiver module with toggle-type output. No programming, configuration, or microcontroller needed — just power it with ~5V DC and pair it with a matching RF keyfob remote. Each of the four buttons toggles its corresponding output pin on and off. The toggle (T4) type...

SKU: TB-SY4036

This small, lightweight 5V SPST reed relay is designed for PCB mounting in a standard DIL (Dual In-Line) package. It switches up to 1A DC with a low 0.1W power consumption, making it suitable for low-power switching applications in sensor circuits, security systems, and instrumentation. Key Feat...

SKU: AF-4056

This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Micro B plug connector, and other is a USB C socket with special over-moldin...

SKU: AF-5844 · MPN: ADA5844

The RJ-12/RJ-11 Telephone Round Panel Mount Extension Cable provides a simple way to add a panel-mount telephone connection to project enclosures. The round panel-mount design fits a standard drilled hole of approximately 30 mm — no custom oval or square cutouts required. Unscrew the plastic nut...

SKU: AF-4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's...