All Products

SKU: PR-PIM110

This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade).It behaves like a keyboard when plugged in via USB and has a default key-mapping (though you can reprogram it using the Arduino IDE). Connections are made using ...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: DF-TEL0108

This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of driving headphones or a small 3 W speaker directly. Powered by 5 V DC via Micro-...

SKU: DF-FIT0601

A lightweight, flexible monocrystalline silicon solar panel with an integrated 5 V voltage regulator and USB Type-A output. The PET-laminated design weighs just 90 g and includes mounting holes and copper clasps for attaching to backpacks or outdoor enclosures. The panel delivers up to 1 A at 5 ...

SKU: SF-CAB-11604

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited hosting capabilities! USB-OTG is common for things like tablet computers and smartphones in order to allow for USB peripherals like flash-drives, keyboard...

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.

SKU: SF-COM-08582

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package. 12MHz is good for use with devices that need USB.

SKU: DF-FIT0265

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on n...

SKU: LB-LS1202

Oooh it's so soft and pretty! If you have to have visible cables then you might as well have the nicest fabric bound cable with a eye-catching snake-like pattern.  That's why we now carry this standard A to micro-B USB cable for USB 1.1 or 2.0. Perfect for connecting a PC to your BBC Micro:...

SKU: SF-CAB-15464

This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 16.5mm apart.

SKU: DF-FIT0884

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. Built with tinned oxygen-free copper wire for stable transmission and minimal sig...

SKU: AF-4106

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: AF-5216

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 2 meters long, with all the pins connecting from one side to the other.

SKU: SF-COM-18375

This is a high grade DC Buck converter that inputs 6 to 12V and outputs 5V up to 3A or 15W. With good thermal performance and protection, this DC block is perfect for battery applications (such as SLAs or LFPs) that need to power a USB or 5V device even while the input is varying (battery charge/...

SKU: DF-DFR0222

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wiz5100 chip which is fully compatible with Arduino Lendardo and Ethernet library,...

SKU: TB-HM3194

A 12-way screw terminal strip rated at 6A and 250VAC. Can be divided into smaller sections with a sharp knife, making it easy to create custom-sized terminal blocks for any project. Each terminal block includes a mounting hole on a fixed pitch. Key Features 12-Way Configuration – Divisible int...

SKU: WS-23739

The Waveshare 10.1" Capacitive Touch Display features an optically bonded IPS panel with 1280×800 resolution and 178° viewing angles. The toughened glass touch panel (6H hardness) supports up to 10-point capacitive touch via USB-C, and the optical bonding process improves display clarity while ke...

SKU: SF-PRT-18382

This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power, a button or an indicator LED), this keeps your wiring nice and organized. It is also commonly used as speaker wire t...

SKU: AF-4109

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: SF-DEV-17712

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minimal working space. This Thing comes flashed with t...