All Products

SKU: EF-EF11087

SKU: EF-EF08180

ElecFreaks Micro:bit Starter Kit is designed for people who is at the door step of learning electric circuit and programming knowledge. The kit has provided some basic electronic components like LED, button, buzzer, temperature sensor , steering engine and motor etc.. You can not only learn basic...

SKU: AF-4035

A 7 cm diameter clear ornament shell designed to house a micro:bit and battery pack for creating interactive, programmable decorations. Perfect for holiday ornaments, classroom projects, or creative coding activities — use the micro:bit's LED display, motion sensors, and temperature sensor to bri...

SKU: EF-EF11088

SKU: LB-LS4548

A standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a Raspberry Pi Model A or B as the cable doesn't stick out as far or the Micro:bi...

SKU: EF-EF10138

The KittenBot Silicone Sleeve is a soft protective case for the BBC micro:bit, available in blue. The flexible silicone wraps around the board to guard against bumps, drops, and scratches while keeping all buttons, the LED matrix, and edge connector accessible. Key Features Soft Silicone Const...

SKU: KI-5603-ZIP

An add-on pack for the Kitronik Inventor's Kit that introduces individually addressable RGB LEDs (ZIP LEDs) to your BBC micro:bit projects. Through ten guided experiments, you'll learn how to control LED colours, animate light sequences, and make LEDs respond to input from potentiometers and sens...

SKU: SF-PRT-15101

This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered. Note: Please k...

SKU: MM-SKU00074

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery connector attached to wires coming from t...

SKU: LB-LS1832

Create a USB powered device.  This 1 meter cable can be soldered to your project to provide 5v of power. 

SKU: EF-EF08198

Smart home Kit is a product about smart home project base on micro:bit which is developed by ELECFREAK. We selected executed components commonly used at home as TMP36 temperature sensor, sound sensor, crash sensor, servo, motor. You can build scene like windowsill, wardrobe and fish tank, crea...

SKU: YH-6000300964

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. There are four colors for choice, each one looks wonderful. We also designed a...

SKU: DF-FIT0625 · MPN: FIT0625

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable battery supply.The holder includes a cover and an integrated power switch, so y...

SKU: LB-PT-LOOP

Contains1 x Cable with 5.2mm ring3 x Screws3 x Nuts

SKU: YH-6000300962

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. There are four colors for choice, each one looks wonderful. We also designed a th...

SKU: EF-EF10095

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, convenient power control. Key Features micro:bit Compatible – JST PH connecto...

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.

SKU: AF-2777

This USB to DC booster cable has an integrated boost converter that steps up 5V USB power to 9V DC, output through a centre-positive 2.1 mm barrel jack. It's a convenient way to power 9V devices from any USB port — whether from a computer, USB wall charger, or battery pack. Rated for 500 mA cont...

SKU: DF-FIT0533

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection. The enclosure has LEGO interface on the back. With LEGO interface, you can build lots of ...

SKU: AF-1833

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or prototype custom USB connections on a breadboard. The board uses a micro-AB conne...