All Products

SKU: AF-5663

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a single byte to select the active channel and all subsequent I2C traffic is route...

SKU: DF-SEN0663 · MPN: SEN0663

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...

SKU: AF-5036

The 64×32 RGB LED Matrix Panel with 2.5mm pitch packs 2048 bright RGB LEDs into a compact 160×80mm panel. With the tightest pixel spacing in the 64×32 range, this panel produces sharp, detailed images ideal for close-up indoor viewing. The panel features two IDC connectors on the back (input and...

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: AF-2276

The 64×32 RGB LED Matrix Panel with 6mm pitch features 2048 bright RGB LEDs in a 384×192mm panel. The widest pixel spacing in the 64×32 range, this panel is designed for viewing from the greatest distance, making it ideal for large signage and displays viewed across a room or further. The panel ...

SKU: AF-4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: AF-1199

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...

SKU: AF-2279

The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate distances. The panel features two IDC connectors on the back (input and output) f...

SKU: AF-2278

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays viewed from a few metres away. The panel features two IDC connectors on the back (...

SKU: SF-COM-14646

A 32×32 RGB LED matrix panel with 1024 individually addressable LEDs on a 190 × 190 mm (7.5 × 7.5″) board. The seamless frame and dual IDC connectors allow multiple panels to be daisy-chained together for larger displays. The panel requires a regulated 3.3–5V power supply capable of sourcing up ...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-2277

The 64×32 RGB LED Matrix Panel with 5mm pitch features 2048 bright RGB LEDs in a 320×160mm panel. The wider pixel spacing makes this panel ideal for viewing from further away, producing clear images and text at distances of several metres. The panel features two IDC connectors on the back (input...

SKU: DF-DFR0471

A 32×16 full-colour RGB LED matrix panel with 512 individually addressable pixels at 6mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs and wide 160° viewing angle work well for both indoor and outdoor installations....

SKU: AF-2101

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: DF-DFR0460

The 64×32 RGB LED Matrix Panel with 4mm pitch from DFRobot features 2048 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features two IDC connectors...

SKU: AF-1484

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output and a 1:16 scan rate with 12 × 16-bit latches handle the display multiplexing. ...

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...

SKU: AF-2026

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...

SKU: SF-COM-08861

Huge 10mm through-hole LEDs. Features: 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-22,000 MCD output Documents: Datasheet LED Tutorial