All Products

SKU: KS-KS0530

The solar tracking kit launched by KEYES is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel and so on, aiming at converting light energy into electronic energy and charging power devices. It also boasts a charging module, a temperature and humidity sensor, ...

SKU: AF-5368

A 5 V, 1.2 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resistant, a...

SKU: AF-5369

This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...

SKU: AF-5366

The 6V 2W Solar Panel from Voltaic Systems uses 12 high-efficiency monocrystalline SunPower cells with 22%+ efficiency. Constructed with ETFE (Ethylene Tetrafluoroethylene) coating, this panel is waterproof, scratch-resistant, and UV-resistant — a significant durability upgrade over PET or lamina...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: LB-LS2065

Item Name: LED Solar LampEmitted Color: White (6000K-6500K)&nbsp;LED QTY:20LEDsSolar panel: 0.65W 17% efficiency&nbsp;Li-ion battery: 2.22WH / 1200mAh&nbsp;LED Type:2835 SMD&nbsp;Lumens: 350LM-500LM&nbsp;Delay time:10s&nbsp;Night Sensor:<10Lux&nbsp;Switch: OFF/AUTO&nbsp;Waterproof: IP65&nbsp;LED ...

SKU: AF-5856 · MPN: ADA5856

A compact 5 V, 0.6 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystalline SunPower cells with 22%+ efficiency, this panel is waterproof, scratch-resi...

SKU: DF-FIT0573

A semi-flexible monocrystalline solar panel rated at 5V and 2A (10W maximum power) with up to 21% conversion efficiency. The ultra-thin, waterproof design weighs just 142g, making it significantly lighter than glass-packaged panels. Includes mounting holes and copper clasps for attaching to backp...

SKU: SF-COM-21256

The SparkFun BabyBuck Regulator Breakout delivers a regulated 5V output from a 6–32V input in an ultra-compact 0.63" × 0.52" form factor. Based on the AP63357 synchronous buck converter from Diodes Inc., it provides up to 3.5A continuous output with high efficiency, integrated MOSFETs, and compre...

SKU: AF-5853 · MPN: ADA5853

This compact 2V 0.3W mini solar panel from Voltaic Systems uses four high-efficiency monocrystalline SunPower cells with 22%+ efficiency. Constructed with ETFE (Ethylene Tetrafluoroethylene), it's extremely durable, waterproof, scratch-resistant, and UV-resistant — a significant upgrade over PET ...

SKU: LB-LS6060

A compact 120 × 120 mm polycrystalline solar panel that outputs 5V at up to 400mA (2W) in direct sunlight. Pre-wired for easy connection to microcontrollers, battery charging circuits, and small solar-powered projects. Key Features 5V Regulated Output – 400mA (2W) in direct sunlight, suitable ...

SKU: LB-LS0040

Power your next project using the Australian Sun with this&nbsp;solar panel. The panel is capable of 3.5&nbsp;watts in the open sun with a peak power output around 6V at 580-600mA. 6v 3.5w 580-600MA&nbsp; High conversion rate, high efficiency output
. Operating voltage: 6v 
Power: 3.5W
 Work: cur...

SKU: SF-PRT-18728 · MPN: PRT-18728

This high-strength acrylic gasket is made for attaching compatible 0.3W solar panels to an enclosure or almost any other flat surface.It creates a waterproof, secure connection between the panel and a wide variety of materials, including plastic and aluminium, when properly applied.For best resul...

SKU: DF-DFR0051

The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog ...

SKU: AF-6126 · MPN: ADA6126

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the connectors. No screws or glue are required; simply snap the board into the...

SKU: AF-1589

A 4700 µF electrolytic capacitor rated for up to 10V. This high-capacitance component is ideal for smoothing voltage spikes and providing current buffering in power supply circuits, servo systems, LED strips, and solar charging setups. Specifications Capacitance: 4700 µF Voltage Rating: 10V ...

SKU: LB-LS2218

This compact solar panel is rated at 3V and 100mA, making it a useful power source for small electronics and maker projects.It comes fitted with a JST connector, so it can be wired into compatible projects without needing to solder directly to the panel leads.Specifications:Voltage: 3VCurrent: 10...

SKU: AF-1902

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...