All Products

SKU: AF-6398 · MPN: ADA6398

The ProS3[D] is a compact ESP32-S3 development board from Unexpected Maker, designed for capable wireless projects with USB-C, LiPo support and plenty of GPIO broken out.It gives you two antenna options on the one board: an onboard 3D high gain antenna and a u.FL connector for an external antenna...

SKU: AF-184 · MPN: 184

Build your own breadboard-friendly adjustable power supply with this soldering kit. Based on the MIC2941 low-dropout regulator, it provides a guaranteed 1.25A output with only 40–400 mV dropout — far better than the LM317's typical 1.25–2.0V. This means you can generate 3.3V from as low as 3.7V i...

SKU: DF-FIT0513

A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the other, compatible with standard 2.54 mm breadboard pin pitch for easy prototyping. ...

SKU: AF-4279 · MPN: 4279

The Adafruit Ultimate GPS with USB brings plug-and-play GPS and GLONASS positioning to any computer, laptop, or embedded Linux device via a built-in CP2104 USB-to-Serial converter. Simply connect a Micro USB cable and start receiving location data at 9600 baud — no microcontroller required. Buil...

SKU: DF-DFR1096

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point for IoT, Wi-Fi, and Bluetooth projects with the full backing of the Arduino eco...

SKU: SF-ROB-22727 · MPN: ROB-22727

The SparkFun XRP Controller is the brain of the Experiential Robotics Platform (XRP), a hands-on educational robotics system designed for middle and high school students. Built around a Raspberry Pi Pico W, it provides WiFi and Bluetooth connectivity, a 6-axis IMU, dual motor drivers, and a Qwiic...

SKU: SF-DEV-15443

The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement for the Arduino Uno or Nano with significantly more processing power, memory, and...

SKU: AF-1272 · MPN: 1272

The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 positi...

SKU: AF-746 · MPN: 746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: AF-3133 · MPN: 3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: AF-1197 · MPN: 1197

A compact dual-connector USB cable with a USB-A plug on one end and both Mini-B and Micro-B connectors on the other. The Micro-B connector carries data and power, while the Mini-B connector provides power only — handy for charging a device via Mini-B or connecting a Micro-B device for data transf...

SKU: AF-5440 · MPN: 5440

The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy world...

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: DF-DFR0627

The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configurable baud rate, word length, and parity settings. Most controller boards like ...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-3036 · MPN: 3036

The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...

SKU: AF-4702 · MPN: 4702

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosyst...

SKU: DF-DFR0827

PiTray mini is a Model B liked carrier board for building cluster with Raspberry Pi Computed Module 4 (CM4). PiTray mini focuses on providing a neat and budget solution for CM4 applications. With the same outline and mounting holes with Raspberry Pi Model B, it can be stacked upon ...

SKU: PR-PIM617

A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....