All Products

SKU: AF-1507

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible white PCB with white mask. Each pixel offers full 24-bit colour control, and only a single data pin is needed to drive the entire strip. Also available with a black PCB. The strip comes...

SKU: DF-FIT0834

This ultra-thin flexible LED strip from DFRobot packs 138 warm white SMD 0805 LEDs into a single metre, with an incredibly slim profile of just 2.5mm wide and 1mm thick. It's ideal for lighting tight spaces where standard LED strips won't fit. Operating at 3V, the strip is compatible with microc...

SKU: AF-1460-2552

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The lower pixel density makes this strip ideal for longer runs where tight spacing isn't needed. The strip is...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-3500

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a massive upgrade in processing power, memory, and connectivity — including native USB...

SKU: AF-1902

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...

SKU: AF-1460

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 5-metre length (150 LEDs total). Each pixel offers full 24-bit colour control with only a single data pin required. Also available in 1-metre and 2-metre lengths. The strip is 12...

SKU: AF-3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: LB-PT91059-300-R

These red flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 300mm, they provide plenty of light while still being easy to manoeuvre. These bulbs operate on 3 volts, making them ideal for use in a variety of lighting applications.Power:0.06W Forward ...

SKU: AF-1004

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover them in heat-shrink to make them weatherproof.You get one piece of three differen...

SKU: AF-3800

The Adafruit ItsyBitsy M4 Express is a high-performance microcontroller board powered by the ATSAMD51 Cortex M4 running at 120 MHz with hardware floating point and DSP support. Packed into a tiny 1.4" × 0.7" form factor, it delivers 512 KB Flash, 192 KB RAM, and 2 MB of SPI Flash for CircuitPytho...

SKU: AF-4319

The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...

SKU: AF-2538

A versatile NeoPixel strip with 30 individually addressable RGB LEDs per metre on a flexible white PCB. Each pixel offers full 24-bit colour control with only a single data pin required. The white PCB blends naturally into light-coloured surfaces. Also available with a black PCB. The strip is 12...

SKU: AF-4481

The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, it can act as both a BLE central and peripheral device — perfect for compact wir...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-4374

The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...

SKU: PJ-PROP_SHIELD_LC

This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier - Clear quality audio output to a small speaker. Fast LED Driver - Drive APA102 / Dotstar LEDs for colorful lighting with rapid response. Flash Memory - 8 Mbyte ...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: AF-5201

The Adafruit IS31FL3741 RGB LED Matrix features 117 individually addressable RGB LEDs arranged in a 13×9 grid with 3 mm pitch spacing. Each 2×2 mm LED is driven by the ISSI IS31FL3741 controller chip over I2C, providing 8-bit PWM per colour channel for full 24-bit colour across the entire display...

SKU: LB-LS5800

This miniature LED Christmas tree decoration uses COB (Chip-on-Board) technology to produce a warm, inviting glow reminiscent of classic Edison bulbs. At just 4cm tall, it's perfect for adding a festive touch to desks, shelves, and small displays. Operating at a low 3V, this compact decoration i...