All Products
Showing 21-40 of 48 products · 12 unavailable products hidden
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
Arduino Nano ESP32
The Arduino Nano ESP32 brings the ESP32-S3 into the familiar Nano form factor, supporting both Arduino and MicroPython programming. Based on the u-blox NORA-W106-10B module, it features Wi-Fi and Bluetooth Low Energy with a built-in antenna, making it ideal for IoT projects. The board runs a 32-...
Gravity: Flexible 8x8 RGB LED Matrix
Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x8 RGB full-color LED matrix module...
DFRobot Gravity Industrial Analog EC Meter Kit (K=1, IP68)
·
This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environmental water monitoring where long-running measurements are needed.The pro probe is ...
OLED Shield LCD Adapter
Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connected via the supplied cable for remote mounting. The top of the shield features an ...
SparkFun Qwiic Shield for Arduino Nano
The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) on your Arduino Nano to four SparkFun Qwiic connectors (two horizontally and two ...
2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface
A 2.13″ four-colour e-paper display HAT from Waveshare that plugs directly onto a Raspberry Pi via the standard 40-pin GPIO header. The panel renders red, yellow, black, and white ink for vivid, attention-grabbing content — perfect for price tags, shelf labels, and low-power status displays. Unl...
SparkFun RedBoard Artemis Nano
The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement for the Arduino Uno or Nano with significantly more processing power, memory, and...
Gravity: Flexible 8x32 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x32 RGB full-color LED matrix module...
Mini USB cable
USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and portable media devices. This is the cable you need for the DFRduino Nano, arduino FI...
Gravity: Infrared Light Photo Interrupter Module (Wavelength 940nm)
·
##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. Whether for robotics, automation equipment, or counting systems, this module pro...
Relay SPDT Sealed
These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VAC, 30VDC).
Gravity: Flexible 16x16 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 16x16 RGB full-color LED matrix mo...
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...
All-in-one Starter Kit for Arduino NANO R4 with 20 lessons and 16 modules
The All-in-one Starter Kit for Arduino NANO R4 is the ideal choice for starting your journey into the world of electronics and maker projects. Perfectly compatible with the Official Arduino NANO R4 board, it integrates 16 diverse sensors (15 onboard sensors and 1 humidity sensor with a Crowtail i...
Gravity: Digital Speaker Module
INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiometer. The module has various advantages (e.g. a compact footprint, simple in...
Gravity: Digital LED String Lights (Warm White) For Arduino - DFrobot
A string of 40 warm white LEDs on a 4-metre wire, controlled via a digital signal through the DFRobot Gravity interface. Create fading effects with PWM or power at a fixed voltage for steady illumination. Ideal for decorative lighting, ambient displays, and creative electronics projects. Key Fea...
DFRduino M0 Mainboard (Arduino Compatible)
DFRduino M0 is the first 32-bit Arduino microcontroller based on ARM Cortex-M0 core that supports 5V logic. If you use a standard UNO-compatible microcontroller in a project, do you ever find that GPIO and processing performance is underwhelming? Upgrading to a Mega style microcontroller is too...
micro: Breadboard
Micro:breadboard is a micro:bit-based expansion board specially designed for STEM-starter. It comes with a 3.23*2.17” breadboard (independent packing, you need to stick them together), on which you can directly build circuit with all sorts of electronic components. All IO ports are led out in ...
SIM7028 NB-IoT HAT for Raspberry Pi, Supports Global Band NB-IoT Communication, Small In Size And Low Power Consumption
The SIM7028 NB-IoT HAT is a compact, low-power Raspberry Pi expansion board with NB-IoT (Narrow-Band Internet of Things) connectivity. It supports global NB-IoT bands and a wide range of communication protocols including TCP, UDP, MQTT(S), HTTP(S), CoAP, and TLS/SSL. Designed for applications re...
