All Products

SKU: DF-SER0046

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...

SKU: PL-228

A 2-5/8" (67mm) plastic robot wheel designed to fit Futaba-spline servo horns, making it a direct fit for continuous rotation servos. Moulded from durable ABS plastic in yellow, this wheel is a popular choice for small robotics projects and mini-sumo bots. The wheel pairs with compatible continu...

SKU: DF-SER0057 · MPN: SER0057

This clutch servo is designed for robots, models and other mechanisms where the servo may be pushed, stalled or forced out of position during use. Its clutch function helps protect the servo by allowing it to reset and keep working after the angle is changed by an external force.Electronic protec...

SKU: LB-LS7259-180

A durable 9G micro servo with full metal gears and 180° rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact builds. Key Features Full Metal Gears – Increased durability and longevity 180° Rotation...

SKU: DF-SER0033

Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can provide torque up to 24kg.cm at 7.4v. Equipped with a lot of adapting piece...

SKU: SF-ROB-27477 · MPN: ROB-27477

A high-performance 12V gimbal motor designed for efficient and reliable rotational movement. This version comes without a built-in encoder, making it more compact (40×16mm) and cost-effective for applications where external position sensing or open-loop control is preferred. With a nominal speed...

SKU: YH-6000300458

The Building Block Motor is a continuous-rotation motor designed for use with building block construction sets. It's ideal for projects that need powered movement, such as car wheels, Ferris wheels, and other motorised mechanisms. Pair it with a compatible controller board and building blocks to...

SKU: AF-2744

We're keepin' it wheel with this one! Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo Wheel is equipped with a silicone tire and a press-fit design to make connecting to your F...

SKU: SF-ROB-12600

These 360° rotation 3:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanical device, or robo...

SKU: DF-SER0070 · MPN: SER0070

The ST3215 is an intelligent serial bus servo for robotics and automation projects that need strong torque, position feedback and tidy wiring. It runs from a rated 12V supply and delivers 30kg.cm stall torque through a coreless motor and metal gear train.A 12-bit magnetic encoder provides 360° ab...

SKU: DF-SER0063 · MPN: SER0063

##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and features an internal configuration of copper gears, with the gear axis thickened to an...

SKU: AF-2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: DF-SER0064 · MPN: SER0064

##Introduction This is an exceptional water-resistant digital servo with impressive torque. It boasts a torque capacity of 35kg and a controllable angle of 180 degrees. It exhibits superior linear motion and features an internal configuration of steel gears, with the gear axis thickened to an opt...

SKU: AF-154

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.To control with an Arduino, we suggest connecting the contro...

SKU: DF-ROB0036

A fully assembled 6 degrees-of-freedom desktop robotic arm powered by six high-torque 25 kg·cm digital servo motors. The V2 version arrives pre-assembled and factory-calibrated, so you can start programming and experimenting straight away. Built from brushed aluminium alloy with metal ball beari...

SKU: EF-EF09081

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make small robot modules, mechanical arm modules and intelligent car modules. Parame...

SKU: AF-2943

This anodised aluminium chassis provides a sturdy, lightweight foundation for building your own mini robot rover. With plenty of mounting holes and slots, it's easy to configure for 2-wheel or 4-wheel designs and simple to modify by drilling or cutting. Specifically designed to work with the Con...

SKU: LB-LR0259

This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 V where noted.A 3-wire cable provides ground, power and control, terminated in a...

SKU: SF-ROB-09065

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...

SKU: AF-167

Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To attach, just remove the horn from your servo, align the splined gear, and use t...