All Products

SKU: AF-1323

Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 x Potentiometers 3.5mm Audio jack (Analog Out) Speaker, PWM Conencted 3 Axis +/1...

SKU: FT-OLSH

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connected via the supplied cable for remote mounting. The top of the shield features an ...

SKU: AF-3517

Everything you need to get started with the Circuit Playground Express — a feature-packed, all-in-one development board that works with Microsoft MakeCode (block-based or JavaScript), CircuitPython, code.org CS Discoveries, and Arduino IDE. Program the same board in multiple ways as your skills g...

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: SF-BOB-13906

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, individually selectable signals, which can be used to do everything from driving eig...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: PI-COM-B003

If you want to be a smooth operator then analog input is essential! This mini operators' joystick uses two 10KΩ potentiometers and a spring-back system for the X and Y axes making it a great input device for many robotics projects Connect one side of each potentiometer to ground, ...

SKU: AF-3795

The Code.org CS Discoveries course is a yearlong curriculum for teaching computer science, and there's even a physical computing unit! For large classrooms and workshops, we recommend our Code.org Classroom pack. But, if you need to supplement your Classroom pack or are learning on your own, w...

SKU: LB-LR0001

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project.  Compatible with Arduino, Raspberry Pi, Micro:bit and other microcontrolle...

SKU: DF-DFR0287

A 128×64 pixel LCD shield with LED backlight that plugs directly into Arduino boards. Supports English, Chinese, and bitmap image display. Includes a built-in 5-direction joystick for menu navigation and interactive control, plus breakout pins for additional I/O. Key Features 128×64 LCD Displa...

SKU: AF-342

This is a generic Wii Nunchuck controller, we haven't tried it with a Wii but it does work great with the Video Game shield, and all the microcontroller code we tried. May come in white or black.We suggest getting a Nunchucky breakout board if you want to use this with an electronics project.T...

SKU: AF-3399

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is powerful, beautiful, fun, and perfect for teaching Code.org CS Discoveries Circ...

SKU: SF-COM-17263

This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick.

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-TEL0168 · MPN: TEL0168

Turn regular 3.3V sensors into wireless BLE sensor nodes with this 5 pack of Fermion BLE Sensor Beacons from DFRobot. Each beacon broadcasts data using Bluetooth Low Energy, so nearby BLE-capable devices such as smartphones and ESP32 boards can scan and receive the data without pairing.The Fermio...

SKU: SS-102010428

Features Powerful MCU: Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz Rich on-chip resources: 264KB of SRAM, and 2MB of onboard Flash memory Flexible compatibility: Support Arduino / Micropython / CircuitPython Easy project operation: Breadboard-friendly & SMD de...

SKU: AF-163

A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and orientation measurement in general-purpose applications. The onboard 3.3V regul...

SKU: AF-1018

A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibration, and orientation in demanding applications. The onboard 3.3V regulator ac...

SKU: DF-SER0044

DSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S with analog feedback has broken its internal potentiometer signal. This is an analog signal with 0~3.3V feedback. You can connec...

SKU: DF-SEN0374

BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic sensor, and a 32-bit microcontroller.With a size of 5.2 x 3.8 x 1.1mm, the BNO0...