All Products

SKU: DF-FIT0294

A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (All...

SKU: AF-1930

A 50 g spool of lead-free SAC305 solder wire in a fine 0.5 mm (0.02″) diameter — ideal for both through-hole and SMT soldering work. The no-clean rosin core flux makes for clean joints without the need for post-solder cleaning. SAC305 is a widely used RoHS-compliant lead-free formulation, making...

SKU: DF-FIT0931 · MPN: FIT0931

##Introduction Comprised of 640 LEDs, this high-brightness flexible filament is 1200mm long and only 2mm in diameter, making it perfect for DIY lighting decoration and 360° all-angle lighting fixtures. It comes with adjustable brightness and requires a 21-24V power supply, with the positive elect...

SKU: DF-FIT0280

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: TB-NS3046

Ideal for surface mount work and rework, solder paste provides a quick and easy soldering solution. Supplied in a syringe for easy application, simply apply it to the soldering pads, put your components in place and heat it with your soldering iron. Solder paste can go off in storage: we have fou...

SKU: DF-FIT0273

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...

SKU: AF-4206

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerful soldering iron & some patience. All you have to do is put a 4.25mm hole wi...

SKU: SF-ROB-24052 · MPN: ROB-24052

Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...

SKU: SF-COM-10800

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a panel. Panels are particularly wel...

SKU: PR-ADVPIKIT

All the electronic components you need to complete the hands-on projects in the Adventures in Raspberry Pi book. This carefully curated kit includes high-quality, Raspberry Pi-compatible parts — from a 3.3V-safe LCD display to breadboard-friendly trim pots and jumper wires — all packed in a handy...

SKU: SF-ROB-09347

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...

SKU: SF-SEN-17049

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's widely used in domestic gas leakage alarms and portable gas detectors. The sensing...

SKU: SF-ROB-09065

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...

SKU: AF-4207

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerful soldering iron & some patience. All you have to do is put a 4.25mm hole with ...

SKU: DF-SER0067 · MPN: SER0067

This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...

SKU: DF-FIT0582 · MPN: FIT0582

This heavy-duty silicone-insulated wire pair is made for high-current power wiring in robotics, models, motors and other demanding maker projects. It uses fine tin-plated copper strands for stable conductivity and oxidation resistance, while staying flexible enough for tight routing and moving as...

SKU: DF-FIT0584 · MPN: FIT0584

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidation resistance, with a twisted multi-strand structure that helps reduce signal in...

SKU: LB-LS3426-1254

These insulated ring terminal connectors (RV1.25-4) provide a reliable crimp connection for securing wires to screw terminals, bolts, and studs. The ring shape fits over standard screws, making them ideal for electrical connections in projects, enclosures, and panel wiring. The red insulation in...

SKU: DF-SEN0169-V2

DFRobot Gravity: Analog pH meter pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.As an upgraded version of pH meter pro V1, the sec...

SKU: TB-ST0358

A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style controls, motor direction switching, and momentary signal routing. Features solder tag...