All Products

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-3061

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz antenna for improved range or custom antenna placement in enclosures. The ATWINC15...

SKU: AF-4062

The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial converter is needed; the chip handles CDC serial, and can also act as a HID keyboard, ...

SKU: AF-5953 · MPN: ADA5953

The Adafruit Pixel Trinkey is a tiny USB microcontroller board purpose-built for driving NeoPixel (WS2812, SK6812) and DotStar (APA102) addressable LEDs directly from your computer. It plugs into any USB-A port and provides screw terminal connections for solder-free wiring to your LED strips, rin...

SKU: AF-2598

The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n connectivity. This version comes fully assembled with headers soldered. The FCC...

SKU: AF-3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: AF-3517

Everything you need to get started with the Circuit Playground Express — a feature-packed, all-in-one development board that works with Microsoft MakeCode (block-based or JavaScript), CircuitPython, code.org CS Discoveries, and Arduino IDE. Program the same board in multiple ways as your skills g...

SKU: AF-157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: AF-4870

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...

SKU: AF-4800

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boards, and information displays that only need to update periodically. Designed fo...

SKU: AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...

SKU: AF-1455

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED control, this board delivers smooth, flicker-free dimming across all channels. ...

SKU: AF-4264

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...

SKU: AF-4900

The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it's a powerful little board for CircuitPython, MicroPython, or C/C++ projects. T...

SKU: AF-1222

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable enough to dedicate to every build. Program it over USB with the Arduino IDE and bri...

SKU: AF-3333

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four programming environments: Microsoft MakeCode (block/JavaScript), CircuitPython, Ardu...

SKU: AF-4438

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...

SKU: AF-3176

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio frequency is software-configurable, allowing you to tune dynamically for your reg...

SKU: AF-2124

The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi...

SKU: AF-3000

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground, which come...