All Products

SKU: AF-2453

The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen capability via USB, making it suitable for interactive projects and kiosks. Compat...

SKU: AF-5337

The ESP32-C3-DevKitC-02 is an entry-level RISC V development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to t...

SKU: AF-4520

The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles in all directions, driven by the ST7789 controller. This is the display module o...

SKU: AF-2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-3813

This complete pack includes everything you need to build animated eyes with a Raspberry Pi (not included). The Adafruit Snake Eyes Bonnet drives two high-density 1.54" TFT displays at 240×240 resolution with IPS wide-angle viewing, delivering sharp, vibrant eye animations with image quality rival...

SKU: AF-4484

The Adafruit Mini PiTFT 1.3" is a compact 240×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. With vibrant colours and excellent viewing angles, it's ideal for adding a user interface, status readout, or visual feedback to headless Pi projects. The dis...

SKU: AF-5783

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your Pi without counting pins or fiddling with breakout boards. The EYESPI standard ...

SKU: AF-3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: AF-2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top...

SKU: PR-PIM345

Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Features Compatible with Raspberry Pi 3 B+, 3, & 2, but not with the original model B or B+ Custom top layers provided for both the 2.8" 320x240 and the 3.5" 480x320 PiTFT+ variants Protects your beloved ...

SKU: AF-4675

A clear acrylic enclosure designed specifically for the Adafruit CLUE board. Laser-cut to accommodate the TFT display, tactile buttons, and capacitive pads, this minimalist case protects your board while keeping all features accessible. Assembly takes less than five minutes with the included nyl...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: EC-DIS04028H

CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module as the main control processor, with a dual-core 32-bit LX6 microprocessor, integrated WiFi and Bluetooth wireless functions, a main frequency of up t...

SKU: AF-3416

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...

SKU: SF-LCD-29467 · MPN: LCD-29467

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...