All Products

SKU: AF-1269

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K3...

SKU: AF-2202

IC sockets let you insert and remove chips easily from assembled kits and projects — no desoldering required. Solder the socket into your PCB or protoboard, then simply press the chip in when you're ready. Swap chips for testing or replace faulty ICs without reworking the board. Key Features 8...

SKU: AF-2204

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3" wide version. Best used with chips that have 20 pins (2x10) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto...

SKU: AF-2463

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 4x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. Comes with one 18mm x 13mm x 10mm piece of solder-less breadb...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-4783

Here's a handy 3-pack of 2cm x 8cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just pla...

SKU: AF-3127

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in white adds a bright, easy-to-read 4-character 14-segment LED display to any Feather microcontroller. Each character can show full alphanumeric text (A–Z, 0–9) plus symbols, making it ideal for clocks, sensor readouts, status messages, an...

SKU: AF-4785

A 3-pack of universal proto-board PCBs measuring 40 × 60 mm, made from sturdy FR4 fibreglass with a black silkscreen on both sides featuring row and column markings. Each board has 280 through-holes (14 columns × 20 rows) on a standard 2.54 mm pitch with no pre-connected traces — connections are ...

SKU: AF-1451

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mixing, indicators, and illumination projects. They plug into a breadboard diagonal...

SKU: AF-4784

Here's a handy 3-pack of 3cm x 7cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just pla...

SKU: AF-1699

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 0.1" spacing so it plugs very soli...

SKU: AF-2203

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 16 pin 0.3" wide version. Best used with chips that have 16 pins (2x8) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto ...

SKU: AF-3130

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...

SKU: AF-3151

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...

SKU: AF-2017

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a chip and some jumper wires in t...

SKU: AF-4031

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as well as a ground pin. You can use any 3.5mm stereo cable with this jack. The pins are on 0.1" spacing so it plugs very solidly (and vertically!) into ...

SKU: AF-2018

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x8 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple points. In our example photo, we put a Trinket in the breadboard,...

SKU: AF-3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: AF-3152

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in red pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 I2...

SKU: AF-3149

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...