All Products

SKU: DF-TEL0159

SIM8262E-M2 is a 5G wireless communication module that supports 5G NR (NSA/SA), LTE-FDD, LTE-TDD, and WCDMA, and can meet the 3GPP R16NR specification. The module supports maximum 3.0Gbps downlink rate. It has optional GNSS system including dual-band GPS, GLONASS, BeiDou, Galileo, and QZSS.The SI...

SKU: AF-2926

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded t...

SKU: SF-CAB-22034

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...

SKU: SF-CAB-22037

A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable RF connection for GPS, cellular, Wi-Fi, and other RF applications. The RP-SMA (R...

SKU: AF-4502

The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±4000°/s and an industrial temperature range of −40°C to +105°C, it delivers excepti...

SKU: DF-FIT0454

This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use. Compatible With: SIM 908 GPS/GPRS/GSM Shield For Arduino SIM800H GPRS IO...

SKU: AF-851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: DF-TEL0143

A wideband 5G antenna covering 600–6000MHz, compatible with all major cellular frequency bands (5G/4G/3G/2G) as well as Wi-Fi. Features an SMA connector with IPEX4 pigtail for easy connection to 5G modules, routers, and access points. The antenna supports 90° bending for flexible pointing and po...

SKU: SF-WRL-30232 · MPN: WRL-30232

This RP-SMA connector is designed for edge-mounting onto a PCB, making it handy for RF prototyping and compact antenna connections.It is suited to GPS and cellular projects that need an external antenna connection brought directly to the board edge. Each connector is fitted with a female signal p...

SKU: AF-1858

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP...

SKU: AF-1859

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cell...

SKU: AF-1991

That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain.  The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're mak...

SKU: SF-WRL-23187 · MPN: WRL-23187

This PCB edge-mount SMA RF connector is made for adding an antenna connection directly to your circuit board. It is a handy choice for prototyping wireless designs that need a standard SMA antenna interface.The connector is suited to GPS and cellular projects, where a robust RF antenna connection...

SKU: EC-WAW19001A

A compact quad-band GSM antenna for cellular communication projects. Compatible with 800/900/1800/1900 MHz GSM networks, making it suitable for use with GSM/GPRS modules and IoT devices that require cellular connectivity. Specifications Frequency Bands: 800–960 MHz, 1710–2170 MHz Connector: I...

SKU: DF-FIT0219

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....

SKU: AF-3237

That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're ma...

SKU: AF-5221

This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push buttons — similar to classic scroll wheel interfaces — and this PCB makes it easy...

SKU: TB-XC4392

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semtech SX1276 transceiver on the 915MHz band (Australian-legal), it's ideal for rem...

SKU: DF-FIT0453

A GSM antenna with SMA connector and magnetic base for easy mounting on ferrous metal surfaces. The 3 m extension cable uses 174 pure copper construction for low impedance, and the antenna provides 2.5 dBi signal gain across the 900–1800 MHz frequency range. Specifications Frequency Range: 900...

SKU: AF-5189

Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard headers. It works with both 3.3 V and 5 V power and logic, making it compatible wi...