All Products

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: SF-PRT-16890

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the topside of the board.These connectors are sold in single units. Four of these conn...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: AF-5930 · MPN: ADA5930

A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect installation. Key Features Keyed Connector – One-way design prevents incorrec...

SKU: AF-1647

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 200mm long We have cables in 5...

SKU: SF-COM-16305

Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle orientation and a surface mount termination. This connector has a current rating ...

SKU: AF-3671

The Adafruit CSI/DSI Cable Extender Thingy lets you connect two 15-pin 1.0mm pitch flex cables end-to-end, extending the cable length for your Raspberry Pi Camera (CSI) or Display (DSI) connection. It handles all the pin rearranging automatically — just snap in two cables and go. Key Features ...

SKU: SF-CAB-28304 · MPN: CAB-28304

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – making it straightforward to connect cameras, displays, and other peripherals. The flexible design allows for e...

SKU: SF-PRT-13268

A large prototyping PCB with v-scored lines that let you snap it to any custom size. The 50 × 25 solder point array provides up to 1250 plated through-hole (PTH) pins on a 2.54 mm (0.1″) pitch grid. Simply snap along the scored lines to create the exact board dimensions your project requires. Ke...

SKU: AF-5767

The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing over SPI and provides an interrupt pin that signals when a touch is detected. The ...

SKU: SF-BOB-28467 · MPN: BOB-28467

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 or Raspberry Pi 5's high-speed interface. Includes a 22-pin flex cable for conn...

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: AF-4524

This 24-pin FFC/FPC extender lets you connect two 24-pin 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. A simple solution when your existing cable isn't long enough to reach. Key Features 24-Pin, 0.5mm Pitch – Matches standard 24-pin FFC/FPC cables End-to-End E...

SKU: AF-4933

A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...

SKU: AF-2098

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The board features two 40-pin flex connectors (both bottom-contact type), allowing ...

SKU: AF-4905

A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket directly...

SKU: AF-4909

A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...

SKU: AF-4230

A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...

SKU: RP-SC1166 · MPN: SC1166

The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 interface, offering quick data transfers up to 500 MB/s. This adapter board features a 16-pin, 0.5mm-pitch FPC connector which is linked to ...

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...