All Products

SKU: SF-CAB-19717

A USB-C to USB-C cable with a built-in LCD display that shows real-time power draw — so you can see exactly how much power your device is pulling. Supports up to 100W USB PD (Power Delivery) at 5A, with USB 2.0 data transfer at 480 Mbps, all in a durable nylon-braided 1.2 m (4 ft) cable. Key Fea...

SKU: AF-1766

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin. When the switch is moved, the spring touches the center pole to make contact. S...

SKU: AF-3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: AF-5629

Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive ...

SKU: SF-PRT-15187

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather shields on top of your ESP32 Thing Plus or plu...

SKU: AF-2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards si...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...

SKU: AF-2884

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad strips for GND and 3.3V — everything you need to add custom components to your Feat...

SKU: AF-3417

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring. Comes as a ...

SKU: AF-3614

Harder, better, faster, stronger! All the control and customization for your robot project. The Parallax Feedback 360° High Speed Servo has the functionality of a light-duty servo, continuous rotation servo, high-speed servo, and encoder in one convenient package - what a triple thre...

SKU: AF-5136

This Felt Padding is for if you want extra cushioning for your DIY keeb. This is specifically designed for the common "GH60" / 60% keyboard layout.You will still need a GH60 enclosure of choice, PCB, and all the components. It makes the perfect mattress support to protect your keyb...

SKU: AF-5293

A soft grey felt sleeve case sized to fit the Raspberry Pi 400 and similarly sized compact keyboards. The wool-like felt fabric provides cushioning and scratch protection, while a strong elastic band keeps the case securely closed during transport. Fits keyboards and devices up to 310 × 150mm (1...

SKU: PL-1930

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard headers and solderless breadboards. Key Features 0.1" (2.54mm) Pitch – Compatib...

SKU: AF-368

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative polarity, assuming a centre-positive configuration (the most common type). Key F...

SKU: SF-BOB-29196 · MPN: BOB-29196

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole pads, along with two extra ground connections. It is handy for RS-232-style pro...

SKU: AF-1919

These female-to-female jumper wires bridge the gap between standard 2.54 mm (0.1″) pitch headers and smaller 2.0 mm (0.08″) pitch connectors. One end has a 2.54 mm socket and the other has a 2.0 mm socket, making it easy to connect 2.0 mm-pitch devices like XBee modules to breadboards and standar...

SKU: SF-PRT-16581

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36 pins total) Pitch – 0.1" (2.54 mm) Type – Female, through-hole Ideal For A...

SKU: SF-PRT-11269

This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible boards that don’t come with headers already installed (like...

SKU: SF-PRT-00115

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in our SparkFun Original boards. They mate very well with break away male headers. Please note: You will probably lose one pin with each cut.

SKU: DF-FIT0206

This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins(PH2.54)) SPECIFICATIONS Material: Plastic Pitch: 2.54mm/ 0...