All Products

SKU: DF-FIT0886 · MPN: FIT0886

This DC power splitter cable lets you run four DC devices from a single power source. It has one DC 5.5 x 2.1mm female connector splitting out to four DC 5.5 x 2.1mm male connectors, making it handy for tidier low-voltage power distribution.The cable is compatible with DC5.5*2.1 connectors and us...

SKU: SF-PRT-10811

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.Documents:Dimensional Drawing

SKU: DF-FIT0151

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, circuit, or project on the other — a simple way to add a standard DC power input w...

SKU: SF-PRT-10288

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.

SKU: SF-PRT-10287

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

SKU: DF-FIT0110

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution. Wi...

SKU: SF-PRT-13126

This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.

SKU: SF-PRT-11476

This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.Do...

SKU: SF-PRT-00119

DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter. Datasheets: Datasheet

SKU: LB-LR0214-142A

One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly converter to the output) PCB board size: 4.5cm * 4.5cm With red power indicator le...

SKU: DF-DFR0568

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent current, it's perfect for battery-powered projects and embedded systems that nee...

SKU: DF-DFR0569

This tiny DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 5 V output from a 3–15 V input. About the size of a coin (17 × 13 mm), it's ideal for embedding in projects where space is tight and a reliable 5 V supply is needed. With a maximum output current of 6...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: DF-FIT0471

INTRODUCTION This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control ...

SKU: DF-DFR0952

This compact DC-DC boost converter steps up input voltages from 2.5V to a selectable output of 5V, 8V, 9V, or 12V (default 12V) at over 80% conversion efficiency. Two solder pads (A and B) on the front of the module allow you to configure the output voltage — refer to the markings on the back of ...

SKU: DF-DFR0946

A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage and maximum current independently. Specifications Input Voltage – 6–35V DC Ou...

SKU: DF-DFR0753

This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio, strong heat dissipation, and large current output, the module is compatible with all 5V main-boards, and can work as an SMD element to be directly sol...

SKU: DF-DFR0831

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, large current servos, programmable LED strip, etc.The module integrates durable cer...

SKU: DF-DFR0570

This is a DC-DC buck-mode power module, with input voltage range 5.5~28V and fixed output voltage/current 3.3V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion and tiny body, convenient to embed.Besides, it has steady output voltage, which can work long time without volt...

SKU: DF-DFR0571

This is a DC-DC buck-mode power module, with input voltage range 8V~28V and fixed output voltage/current 5V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion rate and small size, easy to embed.Besides, it has steady output voltage, which can work long time without voltage...