All Products

SKU: KI-5335

The Kitronik Autonomous Robotics Platform Pico, a fun and hands-on introduction to Robotics with the Raspberry Pi Pico. The Kitronik Autonomous Robotics Platform for Raspberry Pi Pico is a fun and hands-on introduction to buggy robotics. The easy to follow booklet provided with the kit guides you...

SKU: WS-20380

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, and RGB LEDs — all on a single board with no messy external wiring. Powered by t...

SKU: SS-6000200319

Pico robot is a compact and cost-effective educational programmable 2WD smart car. It is based on Raspberry Pi Pico, and uses the MicroPython as programming language, combined with on-board sensors, many interesting functions are realized. This robot possess an infrared receiver and a Bluetoot...

SKU: PH-103393

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...

SKU: AF-3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: DF-DRI0054 · MPN: DRI0054

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...

SKU: DF-DFR0592

The DC Motor Driver HAT is a Raspberry Pi add-on board that drives up to two DC motors via I2C. Built around the TB6612FNG motor driver chip with 1.2 A continuous current per channel (2 A peak), it supports both standard DC motors and motors with encoders through the on-board encoder interface. ...

SKU: WS-19358

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating over I2C. Plugs directly onto the Pico's pin header with a stackable design. Use...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: LB-OWL-CHASSIS-V2

Looking for a Robot Chassis?  Check out our 2 Wheel Robot Chassis.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry pi to get your project moving!

SKU: PR-PIM617

A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....

SKU: YH-3000101267

Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of...

SKU: DF-SEN0307

The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, it's a capable and easy-to-use sensor for robotics, automation, and detection pro...

SKU: AF-3356

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creating animated eye effects in cosplay masks, props, sculptures, animatronics, robot...

SKU: EC-RPA03024P

This smart fan and power expansion board are designed for DIY makers, especially for Raspberry Pi lover, it is compatible with Raspberry Pi 3/ 2B/ B+. Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming. The...

SKU: RP-SC2166 · MPN: SC2166

Powerful On-Device AI Acceleration for Raspberry Pi 5Take your Raspberry Pi projects to the next level with the Raspberry Pi AI HAT+ 2 — a compact, high-performance AI accelerator designed for real-time machine learning at the edge.Building on the success of the original AI HAT+, this next-genera...

SKU: AF-4010

Is your favorite robot currently in a mid-life crisis? Does it need a new purpose or perhaps, direction?  Well now you can find your way with the affordable and easy to use Slamtec RPLIDAR A1.You may have heard of LIDARs when people talk about self-driving cards. A LIDAR is a sensor that can...

SKU: LB-00312

A hands-on guide to building electronic circuits, robots, and cloud-connected devices using littleBits — the snap-together magnetic electronic building blocks. Co-authored by littleBits founder Ayah Bdeir and top-selling author Matt Richardson (Getting Started with Raspberry Pi). With over 60 mo...

SKU: AF-3813

This complete pack includes everything you need to build animated eyes with a Raspberry Pi (not included). The Adafruit Snake Eyes Bonnet drives two high-density 1.54" TFT displays at 240×240 resolution with IPS wide-angle viewing, delivering sharp, vibrant eye animations with image quality rival...

SKU: DF-SEN0631 · MPN: SEN0631

##Introduction The IMX219-120-4Lane 8MP Camera Module is a high-performance imaging solution designed for the Raspberry Pi 5, offering a wide 120° field of view. Featuring the Sony IMX219 photosensitive chip, this camera captures sharp, high-resolution images with a 3280x2464 resolution. The MIPI...