All Products

SKU: AF-415

EL tape is the flat, wide cousin of EL wire — same glowing effect but in a 1cm-wide strip format. The glowing surface is 1cm wide (plastic coating is about 1.5cm), with adhesive on the back for easy mounting. Covered in a PVC-like material for weather resistance, though the connectors are not ful...

SKU: AF-445

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The other side has an adhesive on it so you can stick the tape onto something. Its cover...

SKU: AF-632

A complete starter pack for electroluminescent (EL) tape projects, including a 1 m aqua EL tape strip, a portable battery-powered inverter, and batteries. Everything needed to get started with EL lighting right out of the box — no additional components required. Key Features Complete Kit – EL ...

SKU: AF-447

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The other side has an adhesive on it so you can stick the tape onto something. Its cover...

SKU: AF-410

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. This EL is pink-coated so that it looks white. It looks a little like thin neon. Very...

SKU: AF-546

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in White. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeabl...

SKU: DF-FIT0875 · MPN: FIT0875

This compact COB LED strip is a bright white lighting module for indoor decoration, display lighting and battery-powered projects. It uses 16 LEDs under a silicone encapsulated surface to help protect the chips and support longer service life.The strip runs from DC 5V, giving you flexible power o...

SKU: LB-LR0281-5-W

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in fact flexible and cold to the touch when running. EL wire is great for creati...

SKU: AF-631

Get glowing in seconds with our Electroluminescent (EL) Tape Starter Pack! This pack contains everything you need for your first EL tape project, even the batteries. Includes: 1 meter long x 1 cm wide EL tape strip in Red Portable 4xAAA inverter powerful enough to drive a full meter of st...

SKU: AF-403

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is...

SKU: DF-FIT0876 · MPN: FIT0876

This compact COB LED strip uses 16 LEDs under a silicone encapsulated surface, helping protect the chips while providing a smooth, even warm white light output.It runs from DC 5V, making it suitable for battery-operated lighting projects and other low-voltage builds. The strip is solderable and c...

SKU: AF-4839

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible white LED Strips with 480 SMT LEDs per meter, soldered side-by-side, and diffused with a silicone epoxy! They look a lot like neon or in...

SKU: AF-625

This electroluminescent (EL) panel produces an even, diffused glow across its entire 10 × 10 cm surface. It's the flat equivalent of EL wire — a flexible sheet of plastic coated with EL material that emits a soft, uniform white light (slightly blue-tinted when lit, pink when off). The panel is c...

SKU: AF-2836 · MPN: ADA2836

Add individually addressable red, green, blue and white pixels to costumes, signs, props and ambient lighting projects. Each NeoPixel contains separate RGB and white emitters, so you can create colourful effects as well as cleaner white highlights from the same flexible strip.This version has a w...

SKU: PI-CAB0802

A 100 cm custom-designed cable for connecting Mote LED strip modules to the Mote host controller. Features a matte black TPE shroud and 22 AWG power lines to minimise voltage drop over longer runs. Key Features Length – 100 cm 22 AWG Power Lines – Low voltage drop for reliable LED performance...

SKU: AF-4840

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible white LED Strips with 480 SMT LEDs per meter, soldered side-by-side and diffused with a silicone epoxy! They look a lot like neon or inc...

SKU: DF-FIT0710

This flexible LED strip produces bright, evenly distributed warm white light from 160 LEDs packed into a 50 cm length. Powered by 5 V DC, it can be cut every 5 cm at marked solder points to create custom lengths for any project. The strip is highly flexible and can be bent freely around curves a...

SKU: AF-2434

The Adafruit DotStar APA102 Cool White LED Strip (144 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent white light — far superior to mixing RGB to approximate white. Controlled via...

SKU: AF-2439

An analog LED strip featuring both RGB and warm white (~3000K) LEDs at 60 LEDs per metre on a weatherproof white flexi PCB. Control the entire strip at once using any microcontroller and four transistors (one per channel) — no addressable LED library needed, just PWM for colour mixing. Power the...

SKU: AF-2561

Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with white flex PCB, power supply, and connectors — just add a microcontroller and you're ready to go. Also available with a black flex PCB. With minimal or no soldering required...