All Products

SKU: WS-21707

A 4G/3G/2G communication HAT for Raspberry Pi featuring the SIM7600G-H module with LTE CAT4 speeds and global band coverage. Connect it to a Raspberry Pi, Jetson Nano, or PC via USB to enable high-speed cellular networking, cloud communication, phone calls, SMS, and GNSS positioning. The HAT use...

SKU: WS-19485

4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...

SKU: WS-30717 · MPN: 30717

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite navigation — all controlled via standard AT commands. The HAT connects via the sta...

SKU: DF-TEL0162 · MPN: TEL0162

##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It extensively supports multiple bands, including LTE-FDD, LTE-TDD, WCDMA,and GSM, maki...

SKU: DF-TEL0158

The SIM7600G-H-M2 is the LTE Cat 4 module that supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.The SIM7600G-H-M2 adopts M.2 form factor and M.2 B KEY interface and consists of a SIM7600-H modu...

SKU: DF-TEL0161 · MPN: TEL0161

##Introduction The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computer...

SKU: DF-TEL0177 · MPN: TEL0177

The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8/B20/B28 bands and provides up to 10Mbps downlink and 5Mbps uplink.It brings the...

SKU: DF-TEL0179 · MPN: TEL0179

Add LTE CAT1 connectivity to IoT projects and development boards with this Air780E communication module from DFRobot. It supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 bands, making it suitable for deployments in China, India, Southeast Asia and other supported regions.The module pr...

SKU: DF-TEL0124

The SIM7600CE-T 4G(LTE) Shield is a compact 4G/3G/2G communication and GNSS positioning module in an Arduino-compatible shield form factor. About the size of a credit card, it plugs directly into Arduino UNO, Leonardo, Mega, and similar boards. Supporting LTE CAT-4 with up to 150 Mbps downlink a...

SKU: WS-21708

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS positioning. Connect via USB 3.1 to a Raspberry Pi, Jetson Nano, or PC for high-spe...

SKU: DF-KIT0212 · MPN: KIT0212

Designed for high-accuracy navigation projects, this kit uses Network RTK to deliver 5 cm + 1 ppm centimetre-level positioning across a typical 15-20km operational range. Its onboard 4G module receives RTCM correction data from a CORS network via the Ntrip protocol, removing the need for a local ...

SKU: DF-DFR1226 · MPN: DFR1226

LattePanda IOTA is a palm-sized x86 single-board computer designed to bridge rapid prototyping and commercial deployment. It combines an Intel Processor N150 with onboard 8GB LPDDR5 memory and 64GB eMMC storage in the classic LattePanda V1 footprint.The board keeps the compact 88mm x 70mm form fa...

SKU: DF-DFR1227 · MPN: DFR1227

Built for embedded projects that need desktop-class compatibility in a compact footprint, this palm-sized x86 single-board computer combines an Intel Processor N150 with 16GB LPDDR5 memory and 128GB eMMC storage. It is designed as the next generation of the LattePanda V1, retaining the familiar 8...

SKU: DF-TEL0160

The SIM8262A-M2 is a 5G wireless communication module powered by the Qualcomm Snapdragon X62 modem. It supports 5G NR (NSA/SA), LTE-FDD, LTE-TDD, and WCDMA with up to 3.0 Gbps downlink speeds. The M.2 B Key form factor makes it easy to integrate into existing designs. The module includes optiona...

SKU: PI-PIM716 · MPN: PIM716

Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.WiFi is great, but sometimes you want your connected project to Just Work, wherever in the world it is. Perhaps you're going to a festival and don't know if there will be wireless conn...

SKU: WS-24769

Industrial 4G LTE Router, multiple VPN protocols support, 3-ch Ethernet Ports, WIFI high-speed internet access, dual Qualcomm chips Industrial 4G LTE Router Enhanced WiFi, 1WAN/LAN+2LAN  Supports multiple modes and frequency bands, suitable for countries or regions including Europe, Middl...

SKU: WS-17693

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable Overview  ...

SKU: DF-DFR1090

Comparison Tables   | SKU | Model | Processor | Memory | Storage  |  Wireless |  DFR1080  |  LattePanda Sigma (16GB)  | Intel Core i5-1340P |  16GB  LPDDR5- 6400  | / | / |  DFR1081  |  LattePanda Sigma  (with 50...

SKU: DF-DFR1226-1 · MPN: DFR1226-1

Built for embedded projects that need desktop-class software support, this palm-sized x86 single-board computer combines an Intel Processor N150 with 8GB of LPDDR5 memory and 64GB of onboard eMMC storage. It keeps the classic LattePanda V1 88mm x 70mm footprint and interface layout, making it a p...

SKU: PR-PIM717

The Clipper HAT Mini adds 4G LTE cellular connectivity to your Raspberry Pi, enabling data transmission over mobile networks — perfect for remote or mobile projects where Wi-Fi isn't available. Transmitting sensor readings and control data typically uses very little data, making a small pay-as-yo...