All Products

SKU: AF-2013

Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary encoder or any of our panel mount potentiometers. Swap this in during your build or...

SKU: AF-1929

Build your own open-source 8×8 button grid controller with the Adafruit UNTZtrument kit. Designed by PaintYourDragon and based on the Adafruit Trellis platform, this DIY kit features 64 translucent silicone buttons with diffused white LEDs, housed in a custom laser-cut acrylic enclosure. Powered...

SKU: DF-DFR0536

A gamepad expansion board for the BBC micro:bit. Plug in your micro:bit and it becomes a wireless remote controller or game console. The gamepad features eight programmable buttons (D-pad: up, down, left, right; face buttons: X, Y; front buttons: A, B), plus an onboard vibration motor, buzzer, an...

SKU: PR-PIM536

Now at right angles! Securely attach a HAT (or two mini HATs) to your Raspberry Pi 400, so that they're pointing upwards and correctly oriented.Flat HAT Hacker is an easy way to attach HATs and mini HATs to the back of your Pi 400 so that their alignment matches your Pi 400's keyboard. ...

SKU: PR-PIM171

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. Key Features HAT & pHAT Landing Areas – Accepts both form factors with PCB st...

SKU: AF-4749

A nice whoppin' rectangular slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast acrylic that makes it perfect for glowy projects, especially matrices or NeoPixels.Unlike smoke or other-tinted acr...

SKU: SS-114991884

The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...

SKU: WS-26084

Openings For 40PIN GPIO, PCIe, DSI/CSI Interfaces And Airflow Vents On The Top And For RTC Battery Connector/UART Header On The Side, With Power On/Off Button. Easy To Pull & Plug TF Card On The Bottom Product Show * for reference only, please refer to the Package Content for detailed ...

SKU: AF-5607

A panel-mount DC barrel jack extension cable that lets you add a clean, professional power input to any enclosure — without cutting custom-shaped holes. The round flange means you only need a standard 1″ (25 mm) drilled hole. Unscrew the plastic nut, insert through the panel, and tighten. Done. ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: M5-A042

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Connect this unit with M5Core via GROVE PORTB Single-Bus. We put Magnet on the bac...

SKU: PR-PIM311

The Pico HAT Hacker gives you full access to all 40 GPIO pins on your Raspberry Pi, broken out at the top of the board. Its ultra-thin 0.8 mm PCB can be soldered directly onto the Pi's header pins while still leaving enough pin height to stack a HAT or pHAT on top. Both sides of the board featur...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...

SKU: WS-31501 · MPN: 31501

Unleash your creativity with the ESP32-S3 1.47inch LCD Display Development Board Type B—a powerhouse for innovators and developers alike!  Product Highlights: - Vibrant 1.47-inch LCD: Engage with a stunning 1.47inch IPS display, boasting a 172×320 pixel resolution that delivers sharp and col...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: AF-4594

A sheet of black LED diffusion acrylic designed to enhance the look of LED matrix and NeoPixel projects. This specially cast acrylic sharpens individual pixels and reduces glare, delivering vivid, readable colours both indoors and outdoors. Unlike smoke or other tinted acrylics, this black diffu...

SKU: EF-EF08231

Acrylic Case Characteristic:(1)Bright Colors, bright blue and red make the appearance more beautiful (2)High Hardness,wear-resistant and not easy to break (3)Nice Feel, pocket size and suitable for kid to operate and control. Board Buzzer and Vibration Motor: Enhance kid's gaming experience a...

SKU: YH-6000300518

This acrylic case is designed for the Raspberry Pi 4B with a one-to-one correspondence of hole positions. The cooling fan and camera bracket can be installed and are compatible with 3.5-inch displays. The top cover is easy to open and close for easy wiring. When installing a 3.5-inch display, the...

SKU: PR-PIM064

A ninja black diffusion layer for the Pibow Raspberry Pi case. This 3mm-thick replacement layer softens and diffuses light from LED add-ons like the Unicorn HAT or PiGlow, creating a clean, even glow effect through the dark-tinted acrylic. Simply swap out the standard Pibow layer for this diffus...

SKU: AF-4261

A round panel-mount USB-C pass-through adapter that lets you add a USB-C port to any enclosure using a simple drilled hole — no custom oval or square cutouts required. At approximately 30mm diameter, a standard hole saw or drill bit is all you need. Both sides feature a USB-C jack with full pass...