All Products

SKU: EC-CIL12901M-1 · MPN: CIL12901M-1

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...

SKU: EC-ILM13205D2-915

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...

SKU: DF-DFR1115-915 · MPN: DFR1115-915

This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa communication and LoRaWAN networking.It can be used for point-to-point links or...

SKU: EC-CIL13002M2

Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...

SKU: EC-WIR01323B

The LoRa RFM95 IoT Board for Raspberry Pi is a long-range wireless communication module based on the RFM95 LoRa transceiver. Operating at 915 MHz (AU/US frequency), it provides spread spectrum communication with high interference resistance, making it suitable for IoT, remote sensing, and telemet...

SKU: EC-ILM13103D

ThinkNode G3 is a high-performance, compact LoRaWAN gateway designed for IoT communications by Elecrow. It uses the ESP32-S3 dual-core processor and Semtech SX1262 transceiver, equipped with a 240MHz dual-core main control, integrated Bluetooth, WiFi and optional 4G modules(Not yet released), an...

SKU: PI-PYC003

The Pycom LoPy is a compact, triple-network MicroPython development board combining LoRa, WiFi, and Bluetooth on the Espressif ESP32 chipset. It can function as both a LoRa node (up to 40 km range) and a Nano LoRa Gateway (up to 22 km, 100 nodes), making it a versatile platform for LPWAN IoT depl...

SKU: EC-CRT01259B002

Lora technology and Lora devices have been widely used in the field of the Internet of Things (IoT), and more and more people are joining and learning Lora development, making it an indispensable part of the IoT world. To help beginners learn and develop Lora technology better, we have designed ...

SKU: AF-4074

Add long-range LoRa radio to your Raspberry Pi with the Adafruit LoRa Radio Bonnet. This plug-in board pairs an SX1276-based RFM95W LoRa transceiver with a 128×32 OLED display and three user buttons, giving you a complete radio node with a built-in interface for status messages and user interacti...

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: AF-5712

The Feather RP2040 RFM69 Packet Radio (868/915 MHz) combines the RP2040 dual-core processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication. The exact frequency is software-configurable for 868 MHz or 915 MHz ISM bands. It includes a STEMMA QT connector and a uFL c...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: AF-3072

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 868 or 915 MHz licence-free ISM bands. Based on the SX1276 LoRa chipset, this breakout achieves ranges of approximately 2 km line of sight with a simple wire antenna — or up to 20 km with dir...

SKU: AF-3078

The Feather 32u4 RFM95 LoRa Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with default settings ...

SKU: AF-3076

The Feather 32u4 RFM69HCW Packet Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1231-based packet radio transceiver, USB connectivity, and LiPo battery charging. It offers longer range than 2.4 GHz protocols (Bluetooth, Wi-Fi, ZigBee) with more flexibility than BLE, making i...

SKU: EC-DIS01835A-3

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...

SKU: AF-4072

The Adafruit RFM69HCW Transceiver Radio Bonnet @ 868/915 MHz adds sub-GHz packet radio to your Raspberry Pi. Plug it onto the GPIO header and communicate with remote sensor nodes over distances of up to 500 m (line of sight) using the 868 or 915 MHz ISM bands — with built-in AES-128 encryption an...

SKU: EC-LMM14606D2

The ThinkNode M6 Outdoor Solar Power is a high-performance LoRa IoT device designed for harsh outdoor environments and industrial scenarios.It features the nRFLR1262 LoRa transceiver module and the nRF52840 core processor, supporting Bluetooth and LoRa dual-mode connectivity to ensure stable sign...

SKU: AF-3070

The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 transceiver, it provides FSK packet radio with AES-128 encryption, auto-retra...

SKU: EC-ACS95915S

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference i...