All Products

SKU: AF-1552

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: SF-BOB-21772 · MPN: BOB-21772

This WM8960 breakout is a low-power stereo audio codec board for adding audio input and output to digital projects. The WM8960 works as both a stereo audio ADC and DAC, using I2S for audio data while allowing settings such as I2S configuration and analogue audio routing to be controlled over I2C....

SKU: SF-DEV-20690

The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. gain), Dynamic Range Compression (DRC), Automatic Gain Control (AGC), enable/disa...

SKU: AF-1788

The Adafruit Music Maker MP3 Shield with 3W Stereo Amp turns any Arduino into a powerful audio player, recorder, and MIDI synthesiser — with built-in amplification for driving speakers directly. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, ...

SKU: DF-DFR0777

INTRODUCTIONStarting to build your dream Speakers with this Bluetooth Power Amplifier board! This cost-effective high power Bluetooth amplifier board features 100W output power, a volume control button, Bluetooth 5.0 input, and dual-track output. It can be operated at DC 5~24V, and compatible wit...

SKU: AF-2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: AF-1752

A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks — ideal for portable and battery-powered audio projects. Volume can be controll...

SKU: AF-6309 · MPN: ADA6309

Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for compact audio builds without a separate amplifier.The board takes BCLK, WSEL and DIN...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: DF-DFR0954

This I2S digital amplifier based on the MAX98357 I2S Class D amplifier module works great with microcontrollers with I2S audio outputs like ESP32 and can be applied to projects like IoT nodes, smart home devices, Bluetooth audio players, and so on. The module supports a 3.3V-5V power supply. And ...

SKU: AF-3885

The Adafruit STEMMA Speaker combines a Class D audio amplifier with a 1W 8 Ω speaker in one slim, portable package. Connect ground, 3–5V power, and an audio signal via the JST-PH STEMMA connector or the alligator/sew-pads — no AC coupling needed, the board handles that for you. Sound quality is ...

SKU: SF-GPS-26620 · MPN: GPS-26620

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...

SKU: LB-LS6842

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...

SKU: AF-5770

The Adafruit I2S Amplifier BFF is a compact add-on that brings high-quality 3W audio to any QT Py or Xiao development board. Featuring a MAX98357 Class D amplifier, it delivers crisp I2S digital audio using just three GPIO pins (A0, A1, A2) that don't conflict with I2C, UART, or SPI. Designed as...

SKU: AF-1712

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your...

SKU: AF-987

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...

SKU: PR-PIM267

The pHAT BEAT is a stereo audio add-on for the Raspberry Pi featuring dual I2S DAC/amplifiers, 16 RGB LEDs, and six tactile buttons. It delivers high-quality, amplified digital audio through two channels at up to 3W per speaker. The dual rows of eight APA102 RGB LEDs work beautifully as a VU met...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...