All Products

SKU: AF-851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: AF-852

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: DF-FIT0219

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....

SKU: SF-GPS-28929 · MPN: GPS-28929

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG290P module, featuring advanced anti-jamming technology ideal for navigation in ...

SKU: SF-WRL-18568

This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclosure...

SKU: SF-WRL-15114

This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus this coax is the nice stuff - approximately 1mm...

SKU: AF-2308

A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connector snaps directly onto boards without the need for an adapter. Key Features ...

SKU: SF-WRL-09145

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide

SKU: WS-8781 · MPN: 8781

Enhance your positioning accuracy with our high-performance GPS External Antenna, designed with an integrated amplifier and superior ceramic technology for optimal signal capture and amplification. Suited for a multitude of positioning and navigational applications, this antenna is the perfect ac...

SKU: SF-WRL-00662

This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the our WiFly Shield.Dimensions: 4" LengthDocuments: Datasheet RF Connector Buying Guide

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: SF-CAB-22034

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA connectors provide a secure mechanical connection suitable for GPS, cellular, Wi-F...

SKU: WS-21706

EM06-E LTE Cat-6 HAT for Raspberry Pi, dual antennas LTE-A, multi regions multi band, GNSSEM06-E LTE Cat-6 HAT for Raspberry PiSupports LTE-A and UMTS/HSPA(+) multi networksmulti-constellation high-accuracy GNSS, cloud platform communication, LTE-A networkingFeatures at a glanceThis is an LTE Cat...

SKU: AF-5712

The Feather RP2040 RFM69 Packet Radio (868/915 MHz) combines the RP2040 dual-core processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication. The exact frequency is software-configurable for 868 MHz or 915 MHz ISM bands. It includes a STEMMA QT connector and a uFL c...

SKU: AF-920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: SF-WRL-18569

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclos...

SKU: SF-CAB-21281

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna wi...