All Products

SKU: AF-2077

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. Version R3 is compatible with virtually all Arduino boards including UNO, Mega, L...

SKU: SF-PRT-11376

A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a single Arduino. Key Features 10-Pin Female Header – Standard 0.1″ (2.54 mm) pi...

SKU: AF-85

“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel’s answer, we were told, was something like “well it’s not actually that simple - i...

SKU: SF-PRT-11417

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield t...

SKU: SF-PRT-10007

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for stacking multiple shields. The kit includes two 8-pin and two 6-pin headers — enou...

SKU: AF-196

The Proto-ScrewShield is a dual-purpose Arduino prototyping shield that combines a large through-hole prototyping area with screw terminal breakouts for every Arduino pin. Instead of soldering wires directly, you get sturdy, reliable screw terminals — making it easy to connect and disconnect exte...

SKU: EC-CCH01065C

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...

SKU: SF-KIT-15716 · MPN: KIT-15716

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...

SKU: AF-1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: AF-3366

Stacking headers combine a female socket on top with extended male pins on the bottom, allowing you to stack multiple PCBs on top of each other. Solder the long pins through a board, then plug another board's female headers onto the pins below while connecting yet another board into the sockets a...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: EC-CCH01085C

A 8-pin female header, with extra long legs -- great for stacking Arduino Shields.And if you want 10- pin one, you can change the custom option,Specification Pin Pitch: 2.54mm Contact Length: 12mm Total length: 23.5mm Contact Type: Straight

SKU: AF-1430

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). This is the...

SKU: SF-PRT-09279

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: AF-2866

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: SF-LCD-29986 · MPN: LCD-29986

Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing external display cabling.The board is designed to stack neatly with the SparkFun Red V...

SKU: SF-LCD-30217 · MPN: LCD-30217

This interface board is for Red Vision projects where you want the camera and vision stack, but would rather send video to a larger external monitor than use a small onboard screen. With the LCD removed, it acts as a streamlined bridge between a SparkFun Red Vision Camera Board and an RP2350 RedB...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: SF-DEV-18426

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your Arduino and connect the sensors to read up to si...