All Products
AI Overview
Pimoroni makes some of the best Raspberry Pi and RP2350 add-ons—here are the most relevant picks from your search, with the key compatibility up front.
RP2350 boards & kits (Pimoroni)
- Pimoroni Pico Plus 2 ($30.80) — RP2350-based Pico-style board with 16MB flash, 8MB PSRAM, USB‑C, and Qw/ST.
- Pimoroni Pico Plus 2 W ($40.15) — adds 2.4GHz Wi‑Fi + Bluetooth to the Pico Plus 2, plus 16MB flash/8MB PSRAM, USB‑C, Qw/ST.
- PGA2350 ($18.50) — compact RP2350B breakout in PGA format with lots of exposed pins for advanced builds.
- Pimoroni Explorer ($64.70) — RP2350 “physical computing playground” with 2.8" LCD, speaker, and mini breadboard built in.
Displays & interaction
- Pimoroni Presto - board only ($122.55) — RP2350 desktop companion with 4" square IPS touchscreen, aluminium stand, and RGB backlighting.
- Pico Display Pack 2.8" ($49.35) — add-on for Raspberry Pi Pico / Pico W, featuring a 320×240 2.8" IPS, 4 buttons, RGB LED, and Qw/ST.
LED matrix driving
- Interstate 75 W (RP2350) - RGB LED Matrix Driver ($29.85) — RP2350 controller for HUB75 RGB LED matrix panels.
Raspberry Pi 5 storage
- NVMe Base for Raspberry Pi 5 ($32.90) — adds PCIe NVMe storage to Raspberry Pi 5, supporting M‑key 2230–2280 SSDs.
Build kits
- Picade – 8-inch display ($363.75) — build-your-own Raspberry Pi mini arcade with authentic controls and a 4:3 high‑resolution display.
- Badgeware Badger - Badge + STEM Kit ($149.00) — wearable badge kit built around a 2.7" 4‑level greyscale e‑paper display in a robust case.
Which Pimoroni product type are you looking for?
Collections
Showing 1-20 of 60 products
Dual Phono Connector for pHAT DAC
A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...
Pimoroni Mini Black HAT Hack3r - Fully Assembled
The Pimoroni Mini Black HAT Hack3r breaks out all 40 GPIO pins from your Raspberry Pi while still allowing a HAT or pHAT to sit on top. Connect via the included ribbon cable and access every pin — labelled with function name, BCM number, and physical pin number — for easy debugging, prototyping, ...
pHAT Stack - Solder Yourself Kit
Stack up to 5 HATs or pHATs on a single Raspberry Pi with the pHAT Stack from Pimoroni. This solder-yourself kit lets you mix and match multiple add-on boards for dashboard setups, multi-sensor projects, or any build that needs more than one HAT at a time. The board includes 6 sets of 2×20 pin h...
3 Speaker 4Ω (5W)
A 3-inch (77.8 mm) full-range speaker rated at 5 W with a 4 Ω impedance. Compact enough to embed in custom enclosures, arcade cabinets, internet radio builds, and other audio projects. Key Features 5 W Power – Solid output for its size 4 Ω Impedance – Compatible with most Class D amplifier bo...
HDMI 8 LCD Screen Kit (1024x768)
A high-resolution 8", IPS, 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that's perfect for building into projects like arcade cabinets, or just use it as a handy display for your Raspberry Pi! This new 8" display is a step up from our previous one, with a higher-...
Pimoroni Blinkt! for Raspberry Pi
Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi. The Blinkt! provides a wash or controllable color that is ideal for mood-lighting, 1x8 pixel art, persistence of vision effe...
Colourful Arcade Buttons - Blue
A colourful 30 mm arcade-style pushbutton in blue. With a satisfying 2 mm travel and tactile click, these buttons are ideal for arcade builds, control panels, and interactive projects. Key Features Arcade Style – Classic 30 mm round pushbutton 2 mm Travel – Satisfying tactile feel Colour – B...
Colourful Arcade Buttons - White
A classic arcade-style pushbutton in white, perfect for adding a satisfying, tactile control to your projects. With a short 2mm travel distance, these buttons deliver the responsive feel of a real arcade cabinet. These are the same buttons used in the Pimoroni Picade arcade kits. Whether you're ...
Micro Metal Gearmotor (Extended back shaft) - 1006:1
A miniature brushed DC motor with a 1006:1 metal gearbox and an extended back shaft for attaching optical encoders. This high-ratio gearmotor delivers very low speed with high torque, making it ideal for precision robotics, slow-motion mechanisms, and applications requiring fine positional contro...
Mote Module Cables - 50cm
Custom-designed 50 cm cables for connecting Pimoroni Mote RGB LED modules to the Mote host board. These matte black cables feature quality connectors and heavier-gauge power lines for reliable data and power delivery across your installation. Key Features Matte Black Finish – Discreet appearan...
LED - RGB Common Cathode (pack of 5) - Clear
A pack of five clear 5 mm RGB LEDs with a common cathode configuration. Each LED has four pins — one for red, green, and blue, plus a shared cathode (longest pin). Drive individual colours for status indication or use PWM on all three channels to mix custom colours. Key Features Common Cathode...
Arduino MKR SD Proto Shield
Add a SD slot and prototyping area in a single shield The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as well as store data coming from the web or sensors read by your board! There's al...
Picade Wiring Loom v2
This wiring loom has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT. It's ideal for DIY arcade cabinet builds. The loom consists of four separate sets of wires (26AWG), all 35cm long: 5-pin female connector ...
Antex XS Replacement Bits
A set of three replacement soldering tips for the Antex XS25 soldering iron. Each tip offers a different profile to suit various soldering tasks, from fine-pitch SMD work to general through-hole soldering. Package Contents No. 51 – 2.3mm needle tip No. 53 – 2.3mm tip No. 55 – 0.5mm pointed t...
Mini Speaker 4Ω (3W)
These little speakers are diminutive, but the sound they pump out is surprisingly good. They're ideal for building your own small jukebox or radio with one of our audio boards! The 4Ω 3W speakers measure 40x40x20mm, and come with an approximately 35cm piece of wire (20AWG) attached with pre-ti...
Breakout Garden HAT
Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts into the slots on Breakout Garden and get started coding and creating. It's ideal for prototyping projects without the need ...
Mini Solenoid
A compact push-type solenoid for ringing bells, hitting drums, pushing buttons, or flicking switches. When energised, the plunger extends with a quick push action — ideal for adding physical interactivity to your maker projects. Key Features Rated Voltage – 5 V Current Draw – 0.42 A at 5 V D...
Micro Metal Gearmotor (Extended back shaft) - 50:1
This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80mA (160mA max)0.12kg. cm650mA20:11050±10% rpm90mA (180mA max)0.26kg. cm850mA50:14...
Micro Metal Gearmotor (Extended back shaft) - 11:1
This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80mA (160mA max)0.12kg. cm650mA20:11050±10% rpm90mA (180mA max)0.26kg. cm850mA50:14...
Wide Input SHIM - 1.5m long power cable
Power your Pi with a wide range of input voltages from 3 to 16V!If you need a longer power cable to go with your Wide Input SHIM this is the product for you. This is a 1.5m long 3.5mm OD male to tinned wires cable.
