All Products
Showing 1-20 of 60 products
SEGGER J-Link EDU Mini JTAG/SWD Debug Probe with USB-C Cable
·
The SEGGER J-Link EDU Mini is a compact JTAG/SWD debug probe for students and hobbyists working with Arm® and RISC-V-based microcontrollers. It delivers core J-Link debugging and flash programming functions in a small, minimal form factor.Use it to halt program execution, read or write memory add...
SLogic Combo 8 Multi-function Development Tool
·
##Introduction The SLogic Combo 8 is a versatile development tool that integrates the functionalities of a logic analyzer, CKLink debugger, DAP-Link debugger, and UART module (USB2UART). It allows for arbitrary switching between these functions via buttons. This 4-in-1 tool offers a maximum sampl...
SEGGER J-Link EDU Mini JTAG/SWD Debugger
·
A compact EDU version of SEGGER’s J-Link debug probe, this little unit gives you direct JTAG/SWD access to Cortex-M based targets for programming and debugging ARM microcontrollers.Instead of relying on printf statements and LEDs, you can set breakpoints, inspect memory and registers on a live sy...
Particle Mesh WiFi Bundle - Full Starter Kit
·
Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...
SEGGER J-Link BASE - JTAG/SWD Debugger
·
The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access across a wide range of ARM cores — from Cortex-M0 to Cortex-A9. The J-Link is toolch...
Silicon Labs BGM220 Explorer Kit
The BGM220 Explorer Kit from Silicon Labs is an ultra-low-cost, compact development and evaluation platform for the BGM220P Bluetooth Module. With a mikroBUS socket and Qwiic connector built in, you can quickly add functionality using a wide range of off-the-shelf add-on boards. Programming is s...
ST-LINK V2 Emulator and Debugger
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...
MPLAB PICkit 4 In-Circuit Debugger
This is the PICkit 4, the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers and MPUs using the powerful graphical user interface of the MPLAB X Integrated Development Environment (IDE). The MPLAB PICkit 4 is ...
Emulator and Debugger for MSP430
The MSP-FET430UIF is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can...
LANA TNY CH32V203 Mini Microcontroller Board by Phyx
·
The LANA TNY is a compact development board from Phyx, built around the WCH CH32V203 RISC-V microcontroller. It follows the bite-sized style of boards like the Adafruit QT Py and Seeed Studio XIAO, while adding SMD pins for optional extra IO and a built-in WS2811-compatible LED output.The CH32V20...
RB Link
The RBLink is a development and debugging board for the RedBear Duo, designed for use with the Broadcom WICED SDK. It features an ST-LINK/V2 debugger, USB drag-and-drop programming, and eight Grove-compatible connectors for rapid prototyping with Seeed's Grove sensor and actuator modules. With s...
Adafruit Pixel Shifter - For Addressable LEDs
·
The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not being able to reliably drive 5V LED strips — no more flickering or strange colour ...
Alchitry Cu FPGA Development Board (Lattice iCE40 HX)
The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
Alchitry Au+ FPGA Development Board (Xilinx Artix 7)
The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...
LiPo Fuel Gauge - MAX17043
·
Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 fuel gauge IC.It combines a charge-estimation algorithm with direct A/D measurem...
BLE Nano Kit
The BLE Nano is one of the smallest Bluetooth Low Energy development boards available, built around the Nordic nRF51822 System-on-Chip. Its compact form factor makes it ideal for wearable devices, IoT sensors, and space-constrained BLE projects. This kit includes the BLE Nano board and the MK20 ...
Particle Xenon IoT Development Kit
The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
SparkFun gator:particle - micro:bit Accessory Board
The SparkFun gator:particle micro:bit Accessory Board incorporates the powerful MAX30102 sensor, enabling sensing of pulse oximetry (SpO2), heart rate (HR) monitoring, and particle (PM) detection. As part of SparkFun's gator:bit series of alligator-clippable accessories, it can be easily interfac...
