All Products

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: AF-3533

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SPI, making it compatible with virtually any microcontroller — even those with lim...

SKU: M5-K030

Description Ever wanted to build your robotic car with tiny body and smooth control? Here comes the BeatleC, features a dual-driver and 7 RGB LEDs, extreme concise design and together with M5StickC (features ESP32-Based Wi-Fi control), makes it the handiest and full-function small robotic car ...

SKU: AF-4438

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...

SKU: LB-00258

We’ve all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us were especially mesmerized and had to find out what made them do that. It turns out that this is a property called “thermochromism” and it can be implemented in a number...

SKU: SF-COM-11913

A green inverter connector cable for use with the INV133 electroluminescent inverter, bridging the gap between your inverter and ELastoLite panels. The 4.5-inch cable has bare wire leads that can be ironed directly onto ELastoLite connect patches for a clean, secure connection. ELastoLite is a w...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: AF-1643

Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardles...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: SF-GPS-28929 · MPN: GPS-28929

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG290P module, featuring advanced anti-jamming technology ideal for navigation in ...

SKU: AF-5068

A 12-pack of clear DSA keycaps for Cherry MX and compatible switches. The transparent design allows RGB backlighting to shine through clearly, making them ideal for custom keyboards, NeoKey projects, and macro pads where per-key lighting matters. DSA profile keycaps are fully symmetric in all fo...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-3910

This peristaltic pump moves liquid by squeezing flexible silicone tubing with a rotating clover-pattern roller mechanism — the pump never directly contacts the fluid. This makes it well suited to food, beverage, gardening, and sterile applications where contamination must be avoided. The pump is...

SKU: DF-SEN0704 · MPN: SEN0704

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6201 · MPN: ADA6201

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: SF-SEN-19764

A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwiic connector system, with 0.1"-spaced pins also broken out for soldered connectio...

SKU: DF-FIT0168

A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics and outdoor applications. Key Features Wide Input Range –...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: SF-WIG-12772

The SparkFun Logomatic v2 is a versatile serial and analogue data logger built around the NXP LPC2148 ARM7 microcontroller. It logs data to a microSD card in FAT32 format and appears as a USB mass storage device, so log files can be downloaded by simply dragging and dropping — no special software...