All Products

SKU: AF-931

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...

SKU: AF-3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: DF-DFR0647

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: SF-LCD-24606 · MPN: LCD-24606

The SparkFun Qwiic OLED Display is a compact 0.91″ (diagonal) monochrome OLED screen with 128 × 32 pixel resolution, capable of displaying up to four lines of text. As an OLED, it has no backlight layer — resulting in a thinner profile, lower power consumption, and higher contrast compared to LCD...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...

SKU: AF-2675

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or off by the con...

SKU: DF-DFR0648

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display appl...

SKU: AF-4567

The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying sharp white text, graphics, and animations at up to 30 FPS. With 1...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: WS-19750

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...

SKU: WS-25742

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provides example code for Raspberry Pi, Pico, Arduino, STM32, ESP32, and Jetson Nano. ...

SKU: SF-LCD-23453 · MPN: LCD-23453

The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolution of 128x64 pixels that deliver crisp white-on-black, it's ideal for displaying ...

SKU: KI-56115

The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any additional fixings. The board also features a micro:bit style I/O connector which mea...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: AF-3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the boar...

SKU: WS-24777

A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...

SKU: WS-25512

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with both 3.3 V and 5 V microcontrollers. Waveshare pro...

SKU: LB-LR0085

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V range, making it compatible with Arduino, STM32, ESP32, and other popular microcon...

SKU: AF-2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feat...