All Products

SKU: AF-3105

A compact, breadboard-friendly illuminated tactile switch featuring a blue LED that shines through a universal power symbol on top. Adds both a momentary pushbutton and a colourful indicator to your project in a single component. Similar in size to standard 6 mm tactile switches, this button sna...

SKU: AF-1477

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...

SKU: AF-1476

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the lig...

SKU: SF-COM-11967

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is perfect for basic On/Off functions. Overall len...

SKU: AF-481

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of your enclosure. The flat metal actuator is surrounded by a blue LED ring that lig...

SKU: DF-FIT0115-B

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to identify switch status at a glance. The integrated LED operates on 5–12V, making it...

SKU: EF-EF04034

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadboard or soldering required. This blue version features a large button cap for ea...

SKU: AF-5436

A squishy silicone button module with a built-in PWM controller and colour-changing power indicator. Press to cycle through three power levels — 100%, 70%, and 35% duty cycle — with the illuminated power symbol glowing red, blue, or green to show the current setting. Long press for two seconds to...

SKU: AF-4187

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination separately — light it when pressed, when not pressed, always on, or always off. T...

SKU: PI-COM0410

A simple LED-illuminated tactile push button with a clear cap and blue LED. It works just like a standard tactile switch but lights up when powered, giving your project visual feedback or an eye-catching indicator. Key Features Blue LED Illuminated – Clear cap lets the LED shine through 12 mm...

SKU: LB-LS000A

A pack of 30 tactile pushbutton switches in six vibrant colours — blue, white, yellow, green, black, and red. Each 12mm switch comes with a snap-on square cap, making it easy to create colour-coded controls for your projects. The switches are normally open and momentarily close the circuit when ...

SKU: AF-5236

A rugged chrome-plated metal pushbutton with a built-in full-colour NeoPixel LED ring. Simply drill a 19 mm hole in any panel up to 0.45″ thick, fit the button, and seal it with the included rubber gasket for water resistance. The NeoPixel ring runs on a standard 5V NeoPixel signal line — no nee...

SKU: AF-3104

This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switc...

SKU: AF-3423

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.This is a 22mm Momentary version of the RGB pushbutton. Simply drill a 22mm hole into any material up to 1/4" thick ...

SKU: SF-COM-08720

A miniature surface-mount momentary pushbutton switch with a low-profile design. Ideal for use as a tactile reset button or general-purpose input on custom PCBs. Rated up to 50 mA. Key Features Surface Mount (SMD) – Low-profile for compact PCB designs Momentary Action – Normally open, closes ...

SKU: SF-COM-11274

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the midd...

SKU: AF-6261 · MPN: ADA6261

This 60mm square button is large, inviting, and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades. They're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so they're best kept indoors.The body is black plastic, a...

SKU: DF-DFR0031-B

Piranha LED light module (Blue) , and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino, the digital pin (LOW on, HIGH off) is used to control it. The brightnes...

SKU: AF-3306

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic blue protective casing, and a diffused blue LED at the tip of the switch, this Blue LED Toggle Switch is sure to add some flair (and flare!) to your project.Often seen on control pa...

SKU: RP-PICO-2W-ELEC

If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.The components of this Pico 2W Electronics Kit enable you to create electronics circuits for light and sound.Pico 2 Breadboarding can be hard, t...