All Products

SKU: AF-5366

The 6V 2W Solar Panel from Voltaic Systems uses 12 high-efficiency monocrystalline SunPower cells with 22%+ efficiency. Constructed with ETFE (Ethylene Tetrafluoroethylene) coating, this panel is waterproof, scratch-resistant, and UV-resistant — a significant durability upgrade over PET or lamina...

SKU: LB-PK-SOLARFEB

Tired of your plants giving you the silent treatment? Worry no more! Our innovative SunSplash Plant Whisperer is here to bridge the communication gap between you and your leafy pals. This quirky device is about to revolutionize the way you nurture your green companions! With its superpowers...

SKU: WS-19799

SOLAR POWER MANAGER Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery Recharged From Solar Panel, Or TYPE-C Power Adapter5V/3A Regulated Output Product Features The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V re...

SKU: AF-3809

These panels come to us from Voltaic Systems, makers of excellent solar-powered bags and packs. These are waterproof, scratch resistant, and UV resistant. With a high efficiency monocrystalline cell, they output 6V at 180 mA via 3.5mm x 1.1mm DC jack connector. The substrate is an aluminum / plas...

SKU: DF-DFR1075 · MPN: DFR1075

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standard, making it one of the most connectivity-versatile ESP32 boards available. Wit...

SKU: DF-DFR0580

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This medium-power high-efficiency solar power management module allows you to charge...

SKU: PI-020012R

Autogami is a solar-powered paper car from Litogami. Place it in sunlight to charge the built-in rechargeable battery, then watch it go — or let kids drive it directly under the sun. A full day's charge provides approximately 25 minutes of run time at speeds up to 2 km/h. Each kit contains a pre...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: LB-LS0040

Power your next project using the Australian Sun with this solar panel. The panel is capable of 3.5 watts in the open sun with a peak power output around 6V at 580-600mA. 6v 3.5w 580-600MA  High conversion rate, high efficiency output
. Operating voltage: 6v 
Power: 3.5W
 Work: cur...

SKU: LB-LS6060

A compact 120 × 120 mm polycrystalline solar panel that outputs 5V at up to 400mA (2W) in direct sunlight. Pre-wired for easy connection to microcontrollers, battery charging circuits, and small solar-powered projects. Key Features 5V Regulated Output – 400mA (2W) in direct sunlight, suitable ...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: DF-DFR1236 · MPN: DFR1236

This development kit combines the FireBeetle 2 ESP32-C5 microcontroller board with a dedicated solderless IO expansion shield, giving you a practical platform for smart home and IoT prototypes.The ESP32-C5 brings dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, plus Bluetooth 5, Thread and Zigbee support....

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: EC-PS0306MGE

Need a clean energy source for your project? Check out this compact, high quality, high output endurable solar panel. This solar panel mates directly with many of our development boards and has a high efficiency. Unit has a clear epoxy coating with hard-board backing, provides an efficient and wa...

SKU: SF-PRT-12885

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy...

SKU: DF-DFR0849

A dual-output USB fast-charging buck module with wide 6–32V input range and adjustable 3–12V output. It supports multiple fast-charging protocols including Qualcomm QC 3.0, Huawei FCP/SCP, and Samsung AFC, making it compatible with 99% of smartphones on the market. Both USB channels operate indep...

SKU: DF-DFR1222 · MPN: DFR1222

Built around Espressif's ESP32-C5, this compact FireBeetle board is designed for smart home, robotics and wider IoT projects that need strong wireless performance with low power use. It combines a 240 MHz RISC-V processor with dual-band 2.4 GHz and 5 GHz Wi-Fi 6, BLE, Zigbee and Thread support.Po...

SKU: DF-SEN0291

Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic modules and electrical equipment within 26V 8A, and the maximum relative error is no more than ±0.2% (A simple manual calibrati...

SKU: KS-KS0530

The solar tracking kit launched by KEYES is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel and so on, aiming at converting light energy into electronic energy and charging power devices. It also boasts a charging module, a temperature and humidity sensor, ...

SKU: DF-DFR0579

The Solar Power Manager Micro is an ultra-low-power solar energy management module designed for 1–3 V small solar panels. Built around the SPV1050 IC with MPPT (Maximum Power Point Tracking), it maximises solar conversion efficiency even under weak sunlight — enabling charge-free, battery-replace...